Classified Listings

Find jobs, housing, for sale, personals, services, local community, and events.

USA Online local classifieds

Jobs - Engineering / Architecture classifieds in boston

<![CDATA[We are a well established privately held company growing year over year even in this economic climate looking for Sharp Automation Process Engineer They are looking for People with -Low Volume injection molding process and equipment that is used (volume 30k-40k pats per day and equipment is indexed) -Sonic Welding -PLC -Nice to have medical device background -Someone who has managed a number of technicians in a 24 x 5 environment -Needs to be hands on and be MECHANICALLY inclined! -Must be excited and motivated Roles and Responsibilities: The person in this role will: · be responsible for supporting high speed automation equipment from introduction to the manufacturing environment through its entire productive life cycle and to improve its efficiency and quality levels through direct technical contributions. · drive process validation activities and engineering change control. · provide hands on support of trouble shooting and root cause analysis. · deliver and document process and technology improvements to eliminate machine stops, reduce scrap, and enable machine speed increases working with operating teams, other engineers, and contractors. · perform feasibility studies of automated assembly and test stations at rate prior to initiating broader system development and integration. · provide technical, and project support for execution of single and, at times, multiple projects. · act as a Team Leader with manufacturing and automation technicians for the implementation of Lean Manufacturing methodologies and practices. · provide leadership in developing a proactive and preventive mindset through the use of disciplined engineering methodologies (e.g., DOE, FMEA, GR&R, etc.). The chosen candidate will be responsible for: · maintaining optimum performance of all assembly equipment and tools. · problem-solving, quality system deliverables, functionality of automation equipment. · developing SOPs, work instructions, maintenance procedures and manuals, set-up and calibration procedures. · Ensuring compliance to cGMP, ISO 9002, 13485, 14000, clean room and other general standards and practices. · training technical support and assembly staff on all assembly related equipment. · writing and performing process validation protocols consistent with the FDA QSR. · technical collaboration with vendors and development partners. · maintaining a clean and safe work environment. Qualifications · Automation background, and working knowledge of controls (e.g. PLCs) · Medical device or other Life Science experience · Minimum 5-7 years of significant experience in the development and implementation of manufacturing automation/testing/data analysis systems utilizing the state of the art technologies for plastic component manufacturing · BS in Engineering or related Technical Field · Ability to work independently and as part of a cross-functional team · Strong organizational, written and verbal communication skills · Sound knowledge of process analysis and design - Design for Six Sigma desirable · Strong computer skills, including MS Office Suite, Visio. CAD solid modeling experience preferred · Extended interdisciplinary knowledge including tooling and assembly ]]>

<![CDATA[Electrical Engineer Location Boston, MA Overview: Perform as key technical contributor to new inverter and energy management system designs. Must be able to make overall system architecture tradeoffs and decisions, understand the needs of the end-user as well as the capabilities and limitations of the technology. Must be able to select inverter components and perform calculations necessary to make system design decisions, such as switching and resistive losses, harmonic distortion, stability, and controls bandwidth. Must be able to specify component attributes, system architecture, controls architecture, and communicate ideas and specifications through the use of schematics and modeling. Ability to design circuit boards, from schematic capture through layout and prototyping, is desired. Must work well with others and have excellent communication skills, both verbal and written. Will perform a key role in system design as well as proposal contribution and inter-engineering interface. Qualifications or Background Needed: •Minimum of BSEE. MSEE or PhD in power electronics is a plus. •Proficiency in schematic capture a must. Proficiency in electrical system modeling is a must. Proficiency in software / firmware programming is a plus. •Minimum 3 years work experience in power electronics. About Satcon: Satcon Technology Corporation is a leading provider of utility scale distributed power solutions for the renewable energy market, enabling the industry's most advanced, reliable and proven clean energy alternatives. For over 24 years, Satcon has designed and delivered the next generation of efficient energy systems for solar photovoltaic, stationary fuel cells, wind-turbines, and energy storage systems. To learn more about Satcon, please visit www.Satcon.com. Satcon is an EEO/AAP Employer. ]]>

<![CDATA[We are a well established privately held company growing year over year even in this economic climate looking for Sharp Automation Process Engineer They are looking for People with: -Low Volume injection molding process and equipment that is used (volume 30k-40k pats per day and equipment is indexed) -Sonic Welding -Structured approach, anything that is product related -Ultrasonic Welding -Computer design issues -Documentation -Updating drawings -Great if came out of a medical company -CAD-Solid Woks Roles and Responsibilities: The person in this role will: · Be responsible for supporting product design related issues in a manufacturing environment from production release through its commercial life cycle and to improve efficiency and quality levels through direct technical contributions. · Provide technical and project support for execution of single and at times multiple projects while working closely with Product Development, Operations and Quality personnel. · Lead interdisciplinary teams focused on issue resolution or operational improvements. · Act as the Operations liaison for new product development projects and assume ownership of product responsibility upon release. · Drive product validation activities (IQ, OQ, PQ) and engineering change control for released product (process improvements, new tooling, line extensions, etc) seeking input from R&D as necessary. · Provide hands on support of trouble shooting and root cause analysis in support of production issues, Complaints and CAPAs. · Deliver and document product and design for manufacture / assembly (DFM/DFA) improvements to improve utilization, reduce scrap, and increase productivity. · Directly support Product Development to conduct feasibility studies of automated assembly and test stations at rate prior to initiating broader system development and integration. · Participate on teams with manufacturing and automation engineers for the implementation of Lean Manufacturing methodologies and practices. · Provide leadership to less senior personnel to develop a proactive and preventive mindset through the use of disciplined engineering methodologies (e.g. DOE, FMEA, GR&R etc). The chosen candidate will be responsible for: · Executing daily activities to meet functional and business objectives. · Supporting Process Engineering by maintaining optimum performance of all assembly equipment and tools. · Problem-solving, Quality System deliverables, execution of product design intent in production. · Maintaining Design History Files (DHR) including specifications, prints and other design related documents for released product. · Writing and performing product validation protocols consistent with the FDA QSR. · Technical collaboration with vendors and development partners. · Maintaining a clean and safe work environment. Qualifications: · BS in Engineering or related technical field, Masters degree desired in a technical field. · 5-7 years of significant experience in the development and support of plastic component products, preferably in a Manufacturing or Operations environment. · Medical device / Life Science experience, preferably product related in Class II single use devices or other regulated environment. · Experience in high volume injection molded plastic products (connectors, valves, syringes, lab ware, etc). Silicone based products a plus. · Extended interdisciplinary knowledge including tooling and assembly, ultrasonic welding experience desirable. · Ability to work independently and / or as part of a team. · Strong organizational, written and verbal communication skills. · Sound knowledge of process analysis and design, good documentation practices (ECO, DHR, Quality Systems, GD&T etc.). Design for Six Sigma and Lean manufacturing experience desirable. · Strong computer skills, including MS Office Suite, Visio, CAD solid modeling experience, Solidworks preferred. ]]>

<![CDATA[Resource Control Associates, Inc., a small Civil and Environmental Engineering Company, with offices in Pawtucket, RI and Waltham, MA, seeks a Senior Civil Engineer for a key leadership position within the company. This individual, who will report directly to the Owner, will have the opportunity to grow an engineering group and provide full oversight and management. The successful candidate will possess a combination of technical engineering skills, business development acumen, and the ability to lead and develop staff. Credentials Required Include: * BS in Civil Engineering; Masters degree is a plus; * Registered Professional Engineer in MA and RI, with ability to readily obtain in other states; * Prefer RI Class III ISDS Designer & Class IV Soil Evaluator Licenses; * An entrepreneurial spirit necessary to grow and develop an engineering group; * 10 years experience in diverse civil engineering work including: 1. Roads and sidewalks 2. Storm water and drainage 3. Utility work 4. Water and sewer 5. Land development, including zoning, wetlands and site plan approval * Interest in growing the Engineering Services Group to include services beyond civil engineering; and * Strong computer skills in Word, Excel, AutoCAD Civil 3D, as well as storm water management tools. website: www.resourcecontrols.com ]]>

<![CDATA[AMTI designs and manufactures a broad product line of specialty instrumentation, testing machines and measurement tools for clinical and research medical and industrial applications. Our force platforms are used extensively for biomechanics research, including gait analysis. We are internationally known as a leading manufacturer of human joint motion simulation machines. Our hip and knee simulator machines are placed in the majority of the world’s largest joint implant manufacturer’s laboratories. We are located west of Boston with convenient access to the Mass Pike, Rt. 128, Boston and Cambridge. AMTI currently seeks an entry level SolidWorks draftsman to support new product design and existing product design maintenance. Responsibilities will include solid modeling of machined parts and assemblies, generation of shop and assembly drawings, development and maintenance of BOMs, and completion of ECOs. Opportunities exist to advance into design and engineering roles. An Associates Degree in Engineering or Engineering Technology as well as proficiency using SolidWorks is required. Please submit a resume and cover letter for consideration. This is a 40 hour per week position with nominal work hours from 8AM to 5PM Monday-Friday. AMTI is an equal opportunity employer. For more information about AMTI please visit our Web site, <a href="http://www.amti.biz/" rel="nofollow">http://www.amti.biz/</a>. ]]>

<![CDATA[At Fay, Spofford & Thorndike, Inc. (FST) we are Engineers, Planners, and Scientists in the classic tradition. Since 1914, we have responded to the challenges of our clients' needs. FST has immediate openings in our Massachusetts, New Jersey and New York offices in the following departments: -Transportation/Civil Engineering -Structural Engineering -Electrical Engineering -Mechanical Engineering For further information about our open positions in each location, please visit our website at: fstinc.com Fax: (781) 221-1015 PLEASE REFERENCE THAT YOU SAW THIS POST ON CRAIGSLIST IN YOUR SUBMITTAL FST in an Affirmative Action, Equal Opportunity Employer ]]>

<![CDATA[GCG Associates, Inc. provides civil engineering and surveying services for a variety of civil type projects. GCG is seeking qualified candidates with 1 to 5 years of experience in land surveying capable of working as a member of a survey crew. The work will involve the data collection for municipal infrastructure, site development, utility, and roadway projects. Individual should be capable of operating survey insturments, data collectors, and a GPS unit. Send resume and salary requirements to: Mike Carter, GCG Associates, Inc., 84 Main Street, Wilmington, MA 01887 or fax to 978-657-7915 or email to gcg@gcgassociates.net No phone calls please. ]]>

<![CDATA[Seeking Resident Engineer candidates for immediate 8 to 10 week assignement. - 3 yrs of construction or construction inspection experience REQUIRED - Treatment plant and/or pumping station construction inspection experience is REQUIRED. - Gravity sewers and force mains experience a plus. - BS in civil engineering, environmental engineering or a related field is desired. - Certifications a plus. ]]>

<![CDATA[REHAU is the premium worldwide brand for polymer-based innovations and systems in construction, automotive and industry. You encounter our systems every day, without noticing them. While they may be invisible, their benefit is always tangible. More than 14,000 employees at 170 locations worldwide apply their expertise and innovative capabilities to ensure the continuous growth of our independent privately-held company. People drive REHAU. To us, fostering the development of a diverse group of employees is of central significance. We will advance your career if you are willing to perform and display a readiness to apply yourself. We are looking for someone who will embrace our corporate culture, values and principles. We promote personal development, self initiative and a sense of responsibility in order to support all our employees in fully developing their individual strengths. REHAU Incorporated is seeking an ambitious, experienced Technical Sales Engineer for its Building Technology sales team in Boston, covering the New England territory. Responsibilities will include: - Coordinate and complete HVAC/Hydronic designs including interface with clients, gathering technical information, and completing building load calculations using CAD and calculation software. - Prepare and conduct training/educational seminars, including specifier lunch-and-learns, in order to introduce and convey details regarding REHAU products as well as proper application and engineering. - Provide customers with field engineering and support including application of REHAU product knowledge to ensure customer satisfaction and proper installation. - Support the sales activities of other members of the Building Technology sales team, conduct sales calls, handle customer claims and complaints, assist with order fulfillment, update pricing and price/conditions policy. - Assist with general office operations as necessary in order to ensure smooth business operations. Education/Experience: - Engineering degree in an appropriate field. - Strong computer skills including CAD and analytical design software - At least 3-5 years of sales experience with mechanical systems, prefereably directed toward wholesalers, installers and professional engineers. - Strong design and field engineering accumen with a positive and open approach to potential and existing customers. - Excellent verbal and written communication skills Please visit our website at www.REHAU.com for additional company information. Send resume to: REHAU Incorporated Attn: Human Resources 1501 Edwards Ferry Road NE Leesburg, VA 20176 Fax: (703) 777-6508 ]]>

<![CDATA[Matec Instrument Companies, Inc. a leading manufacturer of ultrasonic imaging systems and equipment has an immediate opening for a Field Service Technician / Engineer. The individual will report to the Field Service Manager and be responsible for field support of our custom-designed systems. Benefits include medical, life insurance and 401(K) plan. Matec is a dynamic and growth oriented company which has been in business for over 30 years. We are looking for an experienced electro-mechanical technician / engineer. If you enjoy making industrial machinery perform, and like to travel to installation locations worldwide, then this is an ideal opportunity. Responsibilities: • Perform Start-up and Commissioning of complex multi axis contour following motion systems used for ultrasonic imaging both in the field and in house. • Diagnose and repair servo motions systems and controls. • Analyze and troubleshoot machinery and implement electro-mechanical field modifications. • Ensure that our equipment meets all functional specifications. • Interface with customers to produce a successful and positive operational outcome. Qualifications: • Associates/technical degree with 5 years exp. or 10+ years technical experience, BSEE a plus. • Experience with the installation and maintenance of precision multi axis motion systems and controls required. • DC Servo drive application and tuning experience. • Creative problem solving ability. • Strong mechanical aptitude. • Ability to work independently in the field. Additional Considerations: • Willingness to travel (at least 50%) • Ultrasonic System and application knowledge a plus. This is a highly visible position requiring all of the above qualifications. If you understand what it takes to make custom machines work and are driven to exceed customer expectations, then we want to hear from you. Please visit our web site at www.matec.com. ]]>

<![CDATA[This individual will directly coordinate all technical aspects of customer project support for all product lines. This is a hands on role; responsible for technical customer support and project management. Primary role is creating solar project layouts and other technical documents used for installation purposes. Experience in collaborating with customers, licensed engineers, and regulatory agencies to execute building projects is expected. Requirements BA/BS in a technical or related area; or, 2 year degree in a technical or related area with 3 years direct experience; or, 5-8 years direct experience Bachelor's degree in Engineering (Structural, Environmental or Mechanical) a plus 5 or more years of experience in project management In-depth knowledge of structural, mechanical, structural and civil engineering design construction related principles, including wind loads and seismic analysis Knowledge of International Building Code Experience in preparing and presenting client-ready technical documents Experience in solar photovoltaic projects a plus Expert knowledge of AutoCAD Working knowledge of SolidWorks Please submit resume for immediate consideration]]>

<![CDATA[hi- have temporary opening for drafter in architect's office using archicad 14 (macs) - full time position for 8-12 weeks - archicad user much preferred - $$$ depends on experience and skill level. start immediately]]>

<![CDATA[Position: Cutting Tool “Inside” Sales Engineer We are a well established, rapidly growing, privately held, global organization that specializes in creating machining solutions with specialized solid carbide cutting tools. Our organization is currently expanding its sales and technical resources. And have created a number of new positions to meet our growing demand for highly skilled and experienced cutting tool professionals. The ideal candidate is a motivated & innovative self starter who has a minimum of 2 years of cutting tool experience in these types of positions: Manufacturing, Production, Sales or Application engineering. Other relevant disciplines also include extensive experience in account management, cutting tool technical support, industrial distribution or carbide tool making. Key responsibilities and Duties include but are not limited to: • Participate in creating and executing customer education programs such as webinars and training seminars • Act as liaison between field, inside sales and engineering groups • Manage key distributor and end-user accounts throughout the country • Provide technical and application support to include tool selection • Participate in drafting and conducting outbound promotional sales call campaigns (no cold calling) • Assist in gathering of technical data for the purpose of new product research & development • Support all sales related activities • Some infrequent travel may be required Education: • 4 year degree preferred but not required • 2 years minimum experience in the solid carbide cutting tool industry or related engineering services • Proficient in Microsoft office; Auto Cad a plus • Strong knowledge of order processing & fulfillment, customer service & manufacturing business processes is also a plus Compensations: Salary + bonus (negotiable), compensation will be commensurate of skill level, experience and attitude This is a full time position. Interested parties should include a cover letter, resume and salary requirements in the response. Please reference the position in which you are applying for. This position will report to the Vice President of Sales. Please do not hesitate to communicate any questions you may have regarding the specific duties and responsibilities of the position. ]]>

<![CDATA[Our customer, located in Westford, MA, has an immediate, long-term on-site contract opening for a Mechanical Designer with 10 or more years of experience in general mechanical equipment design for high reliability or ruggedized applications. The position involves upgrades and modifications to electrical cabling, cable handling equipment, cooling systems, structural supports, and electrical wiring and equipment enclosures. All candidates MUST be US Citizens and be eligible to receive Secret Security Clearances. Requirements: -Candidate must be experienced with operation of machine tools such as drill presses, milling machines and lathes. -Experience with CAD packages such as AutoCad, ProE or CoCreate is desired. -Familiarity with high reliability electronic cabling and connector systems is required. -The ability to work effectively with engineering staff, design staff, vendors and customers is required. This exciting long-term contract opportunity is available through Randolph Associates, Inc., a staffing firm that has specialized in placing engineering personnel in contract and permanent jobs since 1984. We look forward to seeing your resumes! -Randolph Associates]]>

<![CDATA[Position: Associate Controls Engineer Contact Information: jobs@the-uno.com About the Company: BPG Motors (<a href="http://www.bpg-motors.com" rel="nofollow">http://www.bpg-motors.com</a>) is a funded, high visibility early stage start-up targeting the rapidly growing market for innovative, electric urban transport vehicles. Come join us and make your impact on the future today. We are located about 10 minutes from the Kendall Square T station and have plenty of free parking. Description: We are looking for a motivated part time/contract/coop electrical engineer or software engineer to help test and develop the control algorithms for the Uno. The perfect candidate would have a love of motorcycles, experience with C programming and the ability to debug, diagnose electrical/mechanical systems. Experience with designing and programming control systems desired. Responsibilities: - Testing of control algorithms and tuning of control parameters - Brainstorming and troubleshooting existing balancing and driving algorithms for improved performance - Endurance testing (driving the Uno's around in various modes) and providing feedback on performance. - High level C coding of updates to algorithms. - Brainstorming, implementing, and testing fault and safety algorithms. - Building cable assemblies. - System level debug of the Uno. Qualifications: - Minimum of 3 years of engineering class work or equivalent experience - Working knowledge of C. - Understanding of control systems desired. - PIC programming experience highly desired. - Motorcycle experience desired. Charisma: - Motivated. - Thrives in a startup environment. - Can-do attitude.]]>

<![CDATA[NELSON is an international design and consulting firm which, with its licensed affiliates, offers a full array of facilities oriented services including architecture, interior design, strategic planning, engineering, workplace services and information services to corporate and residential clients. We seek a Senior Occupancy Planner to work with the NELSON Strategies group. NELSON provides clients the expertise to align their real estate and workplace decisions with their business objectives. Our solutions deliver the kind of clear, quantifiable results that help corporations to gain a competitive edge and in many cases we are on site delivering this support. We are currently seeking a Senior Occupancy Planner to lead a team that manages the capacity and demand and provide occupancy planning for a regional portfolio of 7-10 million square feet, working on site and directly with the client contacts of the region. This Senior Occupancy Planner will lead and execute the delivery of services offered by NELSON Strategies focused on building occupancy and migration plans in support of real estate strategies. The ideal candidate would have skills in the delivery of occupancy planning services along with knowledge of project management and corporate real estate. Position also oversees the delivery of solutions related to MAC requests. •Summarize finding and recommendations for action or consideration by the Client. •Develop migration plans and sequencing of group moves / relocations •Facilitate and / or resolve planning issues identified in the customer planning meetings. •Aid in the identification to implement the Client’s Alternative Workplace program. •Collaborate with Project Management, Facility Management, and Transactions team on all site rationalization efforts and projects. •Assist in developing site-specific Planning Strategies with Senior Leadership. •Assist in issuing portfolio reports, including headcount projections, supply and capacity information and the status of major initiatives for the portfolio, space allocation, and group block plans. •Manage regional team of 2-3 planners, including providing constructive feedback and regular coaching and assisting in the development of training for the entire OP team. Responsibilities: •Execute migration planning activity which include, but are not limited to the development of migration and phasing plans, stack and block plans, test-fits and collection and analysis of data related to Client’s needs. •The simultaneous integration and deliverables for routine Moves, Adds & Changes (MAC’s) into these plans. •Support the development of alternative scenarios including relative pros and cons of each alternative in the development of the business case to drive decisions. •Present and negotiate plans to internal and external clients on a frequent basis. •Prepare schedules of critical path and milestone events and monitor/communicate timelines to meet deadlines •Provide input to annual financial cycle and capital plan. •Collect, organize and analyze data related to Client’s facility requirements, physical or virtual space needs. •Manage creation of test fits understanding use of space guidelines, office eligibility) and compliance reviews. •Participate in planning meetings and establish good communication and relationships with the business and delivery stakeholders •Project tracking systems and reporting of performance metrics. The NELSON Strategies group uses the Six Sigma process to develop a metrics-driven approach to our strategic planning process from vision setting through program implementation and maintenance, including portfolio audits and optimization, workplace enhancements, gap analysis and scenario planning programs that support our clients’ objectives and deliver substantial cost savings. Our integrated planning model, is a cyclical process that draws on our core tools, industry best practices and diverse experience to consistently improve the quality of our client’s facilities. NELSON partners with our clients to develop innovative solutions that integrate people, process, place, capital and technology to create better environments. In the continuum of NELSON’s integrated services model, we are able to draw on cross-functional teams to provide end-to-end solutions from programming and planning to design and implementation to ongoing facilities support. Job Requirements: •Minimum 6-10 years experience in a corporate environment, in project management and/or corporate planning directly related to the delivery of occupancy planning services. •Bachelor’s degree in Architecture, Interior Design, or other related field. •Supervisory skills leading a team, including mentoring, workload distribution and quality control. •Previous experience in space / occupancy planning at a strategic level, interior office renovations, and using AutoCAD in a planning capacity is required, plus experience with use of client databases and SharePoint sites. •Highly developed proficiency in Excel data manipulation and Power Point. •Familiarity with CAFM systems. •Excellent strategic, analytical, communication, management and presentation skills are essential. •Ability to self-motivate, multi-task and manage numerous projects simultaneously. •Occasional travel may be required. •Established customer service skills to negotiate through Occupancy Planning and MAC’s space tactics and workload requirements. •Comfortable in presentation and negotiation settings with Clients and senior management, functioning in a virtual work environment. •Project management skills. We offer competitive wages based on skills and experience, excellent benefits package including; Paid Time Off, medical, dental, 401K, pre-tax Flexible Spending Accounts, and more. NELSON is an Equal Opportunity Employer. If you feel this may be the career opportunity for you, please email us your resume, cover letter and salary requirements. Due to the large volume of candidates, only qualified applicants will be contacted. No phone calls or agencies please.]]>

<![CDATA[ <h1><img src="http://hiring.accolo.com/company/json/companyLogoPreview.htm?id=228080665"></h1> <h2>Project Manager</h2> Job Label: ENOC-OPS-PJMGR-8 EnerNOC has an immediate need for Project Managers to support our operations in Boston, MA & across all of EnerNOC’s regions.  Project Managers provide oversight and relationship management for high-visibility energy management hardware and software deployment projects.  Each assignment will require the coordination among multiple parties including the customer, electrical contractors, electricity marketplace administrators, permitting and regulatory officials, and EnerNOC staff.  You will be expected to become fully conversant in the New England wholesale electricity market and all associated regulations related to demand response and other EnerNOC offerings.  In addition, you will be required to become familiar with rules and regulations in other EnerNOC markets as necessary.  You will also work on projects to meet our goals in the areas of distributed generation, energy auditing, and energy efficiency services. Candidates will have a track record of successfully managing multiple parallel short-term projects while communicating project status and expectations both in and out of the organization. Attention to detail and follow-up is essential to the success of this role, and candidates must possess a minimum of three years of proven experience in related roles. EnerNOC unlocks the full value of energy management for our utility and commercial, institutional, and industrial (C&I) customers by reducing real-time demand for electricity, increasing energy efficiency, improving energy supply transparency in competitive markets, and mitigating emissions. We accomplish this by delivering world-class energy management applications including DemandSMART™, comprehensive demand response; SiteSMART™, data-driven energy efficiency; SupplySMART™, energy price and risk management; and CarbonSMART™, enterprise carbon management. Our Energy Network Operations Center (EnerNOC) supports these applications across thousands of C&I customer sites throughout the world. Using our C&I customers’ energy usage flexibility, we make capacity, energy, ancillary services, and carbon products available to grid operators and our more than 100 utility customers on demand as a cost-effective alternative to traditional power generation, transmission, and distribution. For more information, visit www.enernoc.com. EnerNOC unlocks the full value of energy management for our utility and commercial, institutional, and industrial (C&I) customers by reducing real-time demand for electricity, increasing energy efficiency, improving energy supply transparency in competitive markets, and mitigating emissions. We accomplish this by delivering world-class energy management applications including DemandSMART™, comprehensive demand response; SiteSMART™, data-driven energy efficiency; SupplySMART™, energy price and risk management; and CarbonSMART™, enterprise carbon management. Our Energy Network Operations Center (EnerNOC) supports these applications across thousands of C&I customer sites throughout the world. Using our C&I customers’ energy usage flexibility, we make capacity, energy, ancillary services, and carbon products available to grid operators and our more than 100 utility customers on demand as a cost-effective alternative to traditional power generation, transmission, and distribution. For more information, visit www.enernoc.com. <div> To apply for this position or refer someone you know, please use our online interview system managed by Accolo. <a href="http://hiring.accolo.com/job.htm?id=258167228&sourceType=9" target="_blank" rel="nofollow">Apply for this job</a> Once you have completed the interview, your information will be forwarded to the hiring authority for decisions on next steps. </div> Related Keywords: project manager, project management, energy, power, green, environment, electricity, demand response, power grid, electrician, green technology, clean technology, utility, utilities ]]>

<![CDATA[Waldron Engineering & Construction, Inc. A specialist in the design, construction, commissioning and testing of power generation, combined heat and power and central heating facilities. TYPICAL DUTIES: 1. Oversee total construction effort to ensure project is constructed in accordance with design, budget and schedule. 2. Includes interfacing with client representatives, A/E representatives, subcontractors, security, etc. 3. Request support from company specialists (Safety, Procurement, Scheduling, etc) as needed on assigned project(s). 4. Authorize/approve all project personnel transactions (hiring, transfers, wages, etc.), purchase requisitions, change requests, etc. 5. On union projects, may assist in jurisdictional disputes and negotiations as required. 6. Ensure all company, client, and project policies, procedures, standards, etc., are adhered to. Interpret policies as required. 7. Maintain official project log and documentation files. 8. Assist with implementation/interpretation of safety programs. 9. Provide direction to planning, scheduling, and engineering functions as required. 10. Perform additional assignments per supervisor's direction. <a href="http://c2cmail.com/boston/boston091310.html" rel="nofollow">Click Here to Apply</a> ]]>

<![CDATA[We are seeking a talented Research Chemist/Engineer to expand our R&D team developing innovative energy solutions. Soane Energy is a Cambridge based startup company founded by a serial entrepreneur and is financed by venture capital. We have a portfolio of exciting new technologies based on polymers and surface science for improving the efficiency and reducing the environmental impact of energy production. See our website (www.SoaneEnergy.com) for more information. This is an opportunity to be a part of the startup environment with the ability to make a large impact on the developing science and outcome of the company. Duties and Responsibilities: • Work independently on applied research projects • Design, synthesize, characterize, and test new materials • Develop new methods for application testing (process simulation) • Communicate ideas and solutions in both internal and external presentations • Contribute to the patent portfolio of the company • Travel occasionally to customer sites and meetings Prerequisites: • BS in Chemistry or Chemical Engineering plus 1-3 years of relevant lab experience • Demonstrated creativity and problem solving • Must have strong communication and presentation skills • Must have a can-do attitude and be responsive in the fast pace of a startup environment Compensation: • Competitive salary commensurate with experience • Comprehensive benefits package • Equity in the company ]]>

<![CDATA[I have a temporary immediate opening for someone who has suvey drafting experience using AUTO CAD 2000 Softdesk 8. They can work in my office for the next week including and especially the weekend as many hours as they want as I have several plans that need drafting. PLEASE ONLY EXPERIENCED PEOPLE. Send experiencedescription (sample survey plan would be great), required hourly rate and hours you are available in the next 9 days.]]>

<![CDATA[Custom lighting manufacturer seeks a highly skilled individual for full time employment. The CAD designer prepares detailed drawings, layouts, and diagrams to support engineering design personnel and the sales department. Experienced CAD designer must be fluent in the use of AutoCAD to construct lighting fixture assembly and detail drawings. Must know advanced features for creating original drawings and be able to derive drawing content from client reference files.CAD designer must be capable of basic project management and follow through and ensure that the components which they designed are fabricated correctly. In this role you will be responsible for the maintenance of the in-house electronic drawing library and assisting the engineering staff in receiving or transmitting CAD drawings via email. You will also be reponsible for digitizing ant existing designs into autocad. REQUIREMENTS • 2+ years AutoCAD experience Required, Solidworks a plus. • Solid understanding of CAD drafting methods and techniques. • Must be able to prepare drawings based on written and verbal instructions. • Must be proficient in all Microsoft Office applications. • Must be detail oriented with good communication skills. CERTIFICATIONS Certification from an accredited AutoCAD Program. Associates Degree preferred BENEFITS The company offers an excellent compensation/benefit package including medical health insurance, paid holidays, vacation, and a nice performance bonus package. ]]>

<![CDATA[Do you have the skills of a graphic designer, engineer and model maker all wrapped up in one package? Do you like a fast paced environment were the job changes by the hour. If so, we are looking for a creative and talented individual to join our product development start up. The job will entail graphic design (Photoshop and Illustrator), CAD work (Solidwork prefered) and general office work (preparing samples and shipments). ]]>

<![CDATA[We are looking for experienced environmental technicians to join our team. We investigate local properties then design, construct and operate soil and groundwater treatment systems so contaminated properties can be redeveloped. We investigate properties for buyers and sellers; sample soil and groundwater; conduct site investigations in accordance with the Massachusetts Contingency Plan; perform containment migration studies; and provide other basic science services. We also install monitoring wells and direct tank removals and replacements. We design, manufacture, install and operate remedial equipment that utilize the latest treatment technologies. We have an excellent part-time position (with potential for full-time in the future) available for an Environmental Technician with experience monitoring and sampling water treatment systems. We are looking for individuals who have the following qualifications: - BS or MS in geology, chemistry, biology or environmental science - Minimum one year experience with groundwater/soil sampling - Hands-on mechanical abilities - Possess excellent oral and written communication skills - Proficiency with computer software and systems - A reliable, self-starter capable of handling multiple tasks You would become a member of our team, providing private and municipal clients with professional environmental services. We offer the opportunity to work on a diverse range of projects, with a mix of office and field work. Our Mansfield facility includes a wet lab for conducting treatability studies and soil testing. We also have a fabrication shop. We are conveniently located in downtown Mansfield, between Boston and Providence, at the intersection of Routes 95 and 495, within walking distance of the commuter rail. For full-time employees, we offer excellent compensation, paid overtime, incentive bonuses, health insurance, a SIMPLE IRA retirement plan, and tuition reimbursement. We foster a pleasant work environment and encourage our team members to take initiative and share ideas. We are a growing company and provide the opportunity for rapid career development and advancement for motivated people. If you want to grow with us, we would like to talk to you. Please visit our web site at www.PenneyEngineering.com to learn more about our company. Please e-mail your resume to Employment@PenneyEngineering.com, or fax your resume to (508) 261-1208. ]]>

<![CDATA[Bioengineering Group is an integrated science and engineering consulting firm that work closely together to create sustainable communities. We approach each project based upon a clear understanding of ecological conditions and the landforms, soil and water resources that support them. For every site we strive to maintain, and often improve the ecological functions to the extent possible while still achieving the client’s objectives. We are looking for a highly motivated junior level Landscape Architect to join the Design Branch team and work with an interdisciplinary team of engineers, scientists and ecologists on ecological restoration projects. The position will be located in our Salem, MA office. Duties: • Creating presentation drawings and renderings • Creating construction drawings in AutoCAD • Fieldwork for the purposes of site assessment • Writing reports with illustrative graphs and tables • Creating graphic material for proposals and presentations Skills Required: • 1-3 years experience that encompasses: <blockquote>- Construction drawing production and plotting; - Grading and Layout skills; - Strong knowledge of native trees, shrubs, perennials and grasses; - Highly developed hand drawing skills and color rendering skills.</blockquote>• Solid communication skills • Strong attention to detail and accuracy • Excellent organizational and documentation skills • Ability to work with a project team • Proficiency in AutoCAD and Microsoft applications • Knowledge of Adobe Suite of graphic software (CS4) • Working knowledge of GIS, SketchUp and other 3D software preferred, but not required Education Requirements: Bachelor’s or Master’s degree of Landscape Architecture from an accredited program]]>

<![CDATA[In order to be considered for this position please reply with your resume and salary requirements, Thank you. About the Company Enel North America, Inc. (ENA) is a leading owner and operator of renewable energy projects in North America, with a presence in 20 U.S. states – operations in 18 and development in two - as well as three Canadian provinces. Based in Massachusetts, Enel North America has a uniquely diversified renewable energy portfolio, generating electric power from hydropower, wind, biomass, and geothermal. This dedication to a quadruple suite of renewable technologies sets ENA apart from other independent power producers. About the Benefits Among other benefits Enel North America offers medical dental and vision plans that take effect on your 30th day of employment; Company sponsored life insurance at 2X your annual salary; and an 80% match on your 401(k) up to 5% of your salary that vests immediately About the Position: Zenith Navigator The Zenith Navigator is responsible for field implementation of the Continuous Improvement Program (Zenith), established in the Operations function of Enel North America, Inc. (“ENA"). The program’s goal is to accomplish a detailed analysis of the power plant environment as well as the major processes in the Operations, to find and implement improvement actions. The related activities are: deep diagnosis of activities and processes, field observation of operations and maintenance activities at power plants ENA operates as well as application of lean techniques that includes power plant performance analysis, problem solving techniques (5S, Value-Added and Not Value Added activities, planning board, SMED etc.) , implementation of improvement actions, and communication and training activities. The Zenith Navigator will be part of the Operating Excellence Function, under the Operations Division. Responsibilities: Conduct process analysis: observe, monitor, gather and organize all the data regarding operational processes (maintenance, operational activities, organization, mentality and behavior) of hydro, geo, and wind power facilities Report and analyze data accurately and in a timely manner, and prepare all the necessary documentation (power point presentation, excel file) Assist in the implementation of continuous improvement program through developing improvement initiatives, evaluating and implementing ideas from the field Support the field operations personnel in the analysis of current performance and find solutions to align actual performance with the overall corporate goals Manage relationships with field and office personal Learn and apply the lean techniques, as well as teach them to the people involved in the program Support and stimulate the continuous improvement culture within the organization and be a reference point of lean culture and techniques Requirements BS in Engineering (Mechanical/Environmental/Civil) or other related area Direct Experience (2y, +) in renewable power plant operation a plus Knowledge of various Windows applications (Excel, Power Point) Good communication skills, both written and oral Strong relationship building skills Task oriented Availability for heavy domestic and international travel for extensive roll-out of the continuous improvement ]]>

<![CDATA[Senior Mechanical Design Engineer – Zyno Medical LLC (Natick, MA) Zyno Medical, a fast growing medical device company located in Boston area is looking for a Senior Mechanical Design Engineer as the main designer of device enclosures and motor driven motion systems. To be successful at this position, high proficiency in 3D CAD (SolidWorks), broad design experience of injection molded parts, as well as in-depth knowledge of machining and tolerance are essential. Chinese (Mandarin) communication skill is required. Minimum 5 years of industry experience is required. RESPONSIBILITIES: - Concept initiation and realization of portable device mechanical structures - Create 3D CAD models for device enclosure and subsystems; - Generate drawings and specifications with consideration of manufacturability, material availability, and cost - Build and optimize prototypes - Finite Element modeling for structural integrity and reliability - Simulation of motion systems EDUCATION: BS (or higher) in Mechanical Engineering EXPERIENCE: 5+ years of industry experience, especially structural design with SolidWorks. ESSENTIAL SKILLS and QUALIFICATIONS: - High proficiency in 3D CAD (SolidWorks) - Broad design experience of injection molded plastic parts, machined metal parts, and sheet metal parts - In depth knowledge of tolerance, especially part tolerance for motion systems. - Strong design for manufacturing sensitivity - Hands-on experience with prototype building - Knowledge of motors, pressure sensors, ultrasonic transducers, and position sensors is a plus -Fluent in both English and Mandarin is required Local candidates only Qualified candidate please send email with cover letter and resume. Please indicate: 1) Salary expectation; 2) Available date; 3) US citizen, permanent resident, or other. ]]>

<![CDATA[SEEK EXPERIENCED AUTO CAD EXPERIENCE. DRAW DISPLAYS, STORE FIXTURES, COMPONENT PARTS, ETC. THIS IS A PART TIME POSITION. WE ARE FLEXIBLE WITH HOURS. SHOULD AVERAGE 8-12 HOURS PER WEEK. PLEASE RESPOND IN CONFIDENCE.]]>

<![CDATA[Growing Large-Scale Commercial Building focused Energy Efficiency Solutions Company based out of the Cambridge Area is looking for a Lighting Retrofit Project Manager/Specialist. Duties Include: 1. Conducting Lighting Energy Audits with Auditor. 2. Working with the Auditor and Sales team to determine best solutions for the customer. 3. Negotiate and Manage Lighting Suppliers. 4. Help design Energy Programs for customers 5. Travel around the Greater Boston Area and work with Sales team to present Lighting Retrofit proposals to customers. 6. Manage the installation and sub-contracting process - ensuring that the project is completed satisfactorily from start to finish. Must Haves: 1. Bachelor's Degree - Preferred in Engineering (Electrical or Mechanical)/Construction related fields. 2. Experience working in the Lighting Retrofit realm. 3. Lighting Energy Audit experience. 4. Have managed Lighting Retrofit projects from start to finish. 5. Understanding of the physical and operational principles that drive energy consumption of major building end users. 6. Solid knowledge of all the various lighting products and manufacturers in the market. If you’re an expert in Lighting Retrofits and Lighting Products, want to work with a smart team with an established track record of success, we would love to hear from you!]]>

<![CDATA[Laser Engineer TeraDiode, Inc. a high growth, Massachusetts-based start-up founded by MIT scientists that develops lasers for industrial manufacturing has an exciting opportunity for a Laser Engineer to join our team in Littleton. The successful candidate will be a hands-on, energetic professional who can manage a variety of tasks in a dynamic environment. Essential Functions: • Work with senior engineers and scientists to develop laser technology and laser systems or applications such as industrial laser machining and laser pumps • Assist senior engineers and scientists in setting up and completing experiments on an optical bench • Assist senior engineers with various engineering, assembly and test work related to laser design and manufacturing • Complete assigned projects independently, such as setting up a new lab. Tasks may include but not be limited to, lab design, equipment sourcing, supervising and assisting contractors • Other responsibilities include optical alignment, optical and electrical testing, gathering and presentation of experimental data • Research solutions using internet and other related sources Qualifications: • BSEE or BS with Major in Physics • Broad background in lasers, fiber optics, and optical systems • Experience with optical test equipment including power meter, spectrum analyzer, tunable lasers • 2 to 3 years experience in two or more of the following areas are preferred: fiber lasers, solid-state lasers, semiconductors lasers, laser-based optical subsystems, laser stabilization, high-power lasers, and optical engineering • Knowledgeable experience with data acquisition software (LabVIEW), data analysis software (MATLAB, IGOR Pro, Excel) desirable • Familiarity with hand tools, electromechanical assembly and electrical troubleshooting a plus ]]>

<![CDATA[One of our best customers, located in Lexington, MA, has an immediate, long-term contract need for a Facilities Space Planner. All work is on-site at our Lexington client. Applicants must be US Citizens and be eligible to receive Secret Security Clearances. Responsibilities: -Create space, furniture and equipment layouts that meet all codes, while improving the facility’s work place quality and functional operation. -Architectural programming for assigned projects and studies. -Help maintain the AutoCAD and CAFM library/ data base, and keep all records current. -Provide reports and presentations using Microsoft Office (Word, Excel, Powerpoint, Project), AutoCAD, Sketchup, Adobe Creative Suite (InDesign, AI, Photoshop). -Develop effective working relationships with clients and support groups to ensure a timely flow of information, which includes: schedules, requirements, layouts and data. -Assist the CAD/CAFM System Administrator with all aspects of supporting and maintaining the AutoCAD environment. -Provide technical assistance to other CAFM users for space tracking and space management. -Provide field verification of construction projects and as-built drawings. Requirements: -A degree in architecture, engineering, design or related study. -5 to 10 years experience in synthesizing information, drawing conclusions and formulating solutions for design and layout tasks. -Research lab experience is desired. -Working knowledge of design, planning, construction, and architectural concepts. -Experience supporting AutoCAD in a networked environment. -Good communication, presentation and interpersonal skills. -Ability to synthesize information, draw conclusions and formulate solutions for design and layout tasks. -Working knowledge of building codes. -Balance conflicting schedules and workloads. -Demonstrated ability to provide creative and innovative solutions. -Accomplished in AutoCAD, Microsoft Office (Excel, Word, Project), and CAFM systems. -Good working knowledge of systems furniture. This long-term contract opportunity is available through RANDOLPH ASSOCIATES, INC., a staffing agency that has specialized in placing engineering personnel since 1984. We look forward to reviewing your resumes! ]]>

<![CDATA[Computer Repair, Servicing needed I have a PC Repair Business called BSOD Computer Repairs, and I am looking to expand my client base.Now i need an exprienced computer repairs for desktops and laptops, for pc and macs.Email back for morre details Additional advantage * Installation of operating systems * Removal of viruses,spyware,malware and the like * Computer upgrades * Setting up of new computers * Building of custom computers * Data recovery * Computer repairs and maintenance * Recommendations for faster and better performance *Network setup and repairs]]>

<![CDATA[For the engineer with solid experience troubleshooting technical issues with lasers, optics and electro-mechanical equipment seeking a new challenge with career growth potential, the Technical Support Engineer opportunity with Newport Corp. has what you are looking for! In this exciting role, you will work both autonomously and as part of a team to troubleshoot complex issues on products with optical, electrical, and mechanical components. This is not your run of the mill technical position, with us you will have the opportunity to get a big picture view of the products that you are working on and actively participate in engineering process feedback loop for these cutting edge products as your career with us advances. This is an opportunity to grow your career with a leading high-tech company in a stimulating and rewarding work environment. Newport Corporation (NASDAQ: NEWP) is a globally recognized leader in advanced technology products and solutions for fields such as Research, Life & Health Science, Aerospace & Defense, Industrial Manufacturing, Semiconductors, and Microelectronics. Our nearly 40 years of industry knowledge and expertise crosses a broad range of technologies, allowing us to continually deliver innovative products and solutions in a myriad of areas such as: Lasers and Light Sources, Opto-mechanical Components and Mounts, Optical Filters and Gratings, Spectroscopic and Photonic Instruments, Vibration Control, Motion Systems, Robotics and Automation, Advanced Packaging and Customized Systems. Based out of Billerica, MA, your primary mission will be to troubleshoot customer issues and conduct preventative maintenance on our industry-leading products, integrating your knowledge of optical, electrical and mechanical components. For success in this position, you will draw heavily upon your previous experience working with optics, lasers, and electro-mechanical assemblies, as well as hands-on experience with equipment such as power meters, beam profilers and PLC's. We work in a low volume manufacturing environment where our specifications are often driven by customer demand so your work here will be constantly changing. Your strong communication skills, high capacity for analytical thinking, active problem solving ability, and attention to detail will be vital as you troubleshoot issues of varying complexity based on customer-needs and specifications. Experience working with optics will be necessary and a degree or technical training certification in electronics or mechanical components would be preferred. If you are passionate about your work and want to experience a higher caliber role with a chance to work on cutting edge equipment, we look forward to learning about the contributions you can make to our organization. To apply for this position or refer someone you know, please use our online interview system managed by Accolo. <a href="http://hiring.accolo.com/job.htm?id=250724344&sourceType=9" target="_blank" rel="nofollow">Apply for this job</a> Once you have completed the interview, your information will be forwarded to the hiring authority for decisions on next steps.]]>

<![CDATA[Senior Voice SQA Engineer POSITION SUMMARY • Lead the qualification and interoperability testing of VOIP products DUTIES & RESPONSIBILITIES Candidate will perform the following duties: • Assure design and implementation meets quality objectives • Manage small group of voice QA engineers to assigned projects • Be a key hands-on contributor to developing, maintaining and extending functional VoIP interoperability test scenarios. • Lead the migration and implementation of manual testing to automated test suites • Work closely with development engineering in debugging issues as well as working with 3rd party VoIP platforms for provisioning and troubleshooting. • The ideal candidate must also be able to demonstrate flexibility via a willingness to occasionally participate in other testing efforts as project priorities warrant, such as interaction with the Customer Support team for reported problem reproduction. QUALIFICATIONS • Overall knowledge of networking trends and operations • Minimum 5 years of industry experience in telecom and IP products (CPE, Gateways, and Softswitches). • Strong VoIP Interoperability test experience (SIP, MGCP, H.248, NCS, RTP) with multiple Softswitch vendors. • Skilled in Telephony and Voice over IP technology, network testing, and troubleshooting. • Familiar with advanced telephone call features (Call Forwarding, Call Waiting, Call Transfer, Three Way Calling, CID, CW/CID, VMWI, Fax • Familiar with country specific dialing plans and operation • Familiar with NMS/EMS platforms. ]]>

<![CDATA[Exciting position, Immediate opening available! We are an industry leader in spectroscopy based process analytical equipment. Our products serve chemical and petroleum plants around the world, applications include monitoring chemicals for environmental and quality assurance. We are currently seeking an Electrical Engineer with a diverse background to join our team in our Concord, MA office. Candidate must have 10+ years experience and will be responsible for producing high quality electrical engineering design deliverables (with the assistance of design and/or drafting personnel). Primary focus of position will involve detailed design drawings and specifications. Apply electrical engineering principles and techniques to research, develop, design, and test electrical components, equipment, and systems. Able to fabricate electronic boards, test, and evaluate systems. Can perform electronic board layout using software tools and will use electronic design modeling tools for design of complex circuit and systems. Will develop complex electronics circuits and can test designs on prototype boards. Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using independent judgment in making adaptations and modifications in testing electrical components, equipment, and systems. Apply electrical engineering principles and techniques to research, develop, design, and test electrical components, equipment, and systems. Candidate must have, at a minimum, a B.S. in Electrical Engineering and have strong electrical engineering skills. We offer an excellent compensation and benefits package including medical and dental insurance, 401(k) plan, paid vacation and holidays. We are an Equal Opportunity Employer. PLEASE SUBMIT YOUR RESUME, COVER LETTER AND SALARY REQUIREMENTS IN MS WORD OR PDF FORMAT. ]]>

<![CDATA[ JOB TITLE: Sr. Software Engineer/Architect - Embedded POSITION SUMMARY This position is responsible for the architecture, design, and development of embedded system device driver and protocol software for state-of-art optical access network devices. We’re looking for a C/C++ software engineer with hands-on experience in real-time embedded software development of switch/router functionality. Experience in device drivers, control plane software, and data/forwarding plane firmware is essential. Experience in Passive Optical Networking (PON) is desired, but not required. Team leadership skills are a must. DUTIES & RESPONSIBILITIES Candidate will perform the following duties: • Lead a team of senior engineers in concept, architecture, development, and release to market of new optical systems • Analysis of customer requirements • High level and detailed software design that reflect requirements • Software Implementation • Integration Test • Troubleshooting Field Issues MINIMUM REQUIRED SKILLS/EXPERIENCE/EDUCATION Candidate must have the following skills: • Experience in complex chassis based software designs including interaction with network management platforms • Thorough understanding of Layer II and Layer III networking and protocol operations • Experience with Real-time Software Architectures • Experience with VxWorks, Device Drivers, Board Support Packages • Experience with Languages: C, C++ • Experience in Software Development Methodology • Education: MS Computer Science or Electrical Engineering • Experience: 6-8 years relevant experience PREFERRED SKILLS/EXPERIENCE/EDUCATION The following skills are desired: • Experience with Software Lifecycle tools: Rational Suite • Experience with Gigabit/10G Switching fabrics • Experience with Passive Optical Networks (PON) ]]>

<![CDATA[Temp 6 Month Contract Vertex Pharmaceuticals Incorporated is a global biotechnology company committed to the discovery and development of breakthrough small molecule drugs for serious diseases. The company's strategy is to commercialize its products both independently and in collaboration with major pharmaceutical companies. Vertex's product pipeline is focused on viral diseases, inflammation, autoimmune diseases, cancer, pain and bacterial infection. Primary Job Responsibilities: Help in the planning and executing of storage migrations across a variety of platforms and architectures. Possibly assist in provisioning, configuration management, troubleshooting and monitoring health of overall storage infrastructure. Execute changes according to established change management practices. Job Requirements: • Minimum 5 years IT experience in an Infrastructure support role specializing in storage management • Strong technical, analytical, and troubleshooting skills with experience in troubleshooting multi-tier environments • Excellent communication skills - both written and verbal. Must be able to communicate with all team members, both technical and non-technical • Self-motivated with strong organizational skills, the ability to juggle multiple high-priority tasks and maintain attention to detail. • Experience working with teams in different time zones and coordinating duties to coincide with global operational schedules. • Strong experience working with Enterprise SAN/NAS architecture, protocols, and best practices (EqualLogic, HP, NetApp) • Solid understanding of storage interface technologies such as iSCSI and Fibre Channel. • Experience operating in a Brocade SAN fabric environment (certification a plus) • Proven storage provisioning skills, including disk assignment, and LUN masking • Working knowledge of Enterprise LAN/WAN network architecture, protocols, and best practices as related to iSCSI (Cisco certification or equivalent a plus) • Working knowledge of UNIX, Linux and Microsoft Windows Server (certifications a plus) • Experience with data migration tools: robocopy, richcopy, rsync, dump, tar, etc. • Experience with Enterprise monitoring systems (Nagios a plus) • Pharmaceutical & FDA regulated experience a plus, experience supporting a Research environment a plus Vertex Pharmaceuticals Inc., is an EQUAL OPPORTUNITY EMPLOYER. To Apply for this position, please <a href="http://appclix.postmasterlx.com/track.html?pid=ff8080812896bf3c0128a68806ec30ec&source=craigslistboston" rel="nofollow">CLICK HERE</a>]]>

<![CDATA[• One of the objectives of TRM is to be comprehensive, nationwide, site acquisition, construction, and installation organization. We continue to expand our team of well-respected individuals that are interested in building an organization based on their experiences and visions. Initial responsibilities will be focused on A&E Management and Construction Coordination. The following is an outline of criteria, responsibilities and opportunities that will be incorporated into the comprehensive position of A&E Manager / Construction Coordinator. This role is to ensure the efficient flow of the process between the Site Acquisition and Construction divisions of TRM. A general outline of responsibilities is below. •Coordinate the design and production of A&E documents required for leasing, zoning, & permitting • Interface with Site Acquisition team to forecast internal TRM Construction handoff • Prepare and complete necessary surveys, forms, reports, sketches, photos, exhibits, applications and other tasks related to construction efforts on various projects • Maintain and update a project tracker • Schedule and manage TRM and subcontractors • Coordinate, procure, and track PO’s from the client • Coordinate, procure, and track PO’s to TRM’s subcontractors • Prepare track and deliver closeout packages to TRM’s client • Attend weekly status meetings to go over site status – proactively. • Prepare all documents for bid walks • Focus on developing opportunities for TRM • Develop client and industry relationships to bring success to all project(s) • Manage yourself, employees, subcontractors and our clients to meet or exceed established performance goals • Provide bids, kitting lists, updated trackers to clients as needed and required. • Work closely with TRM’s personnel and clients to develop a successful team atmosphere and successful projects • Maintain a periodic presence in the clients’ office to facilitate a positive working relationship • Through working with other team members, ensure work product and deliverables are of the best quality and done in a timely manner. • Work closely with team members to ensure proper methods, strategy and approach for timely completion of projects. • Ensure the proper paperwork is in place to allow for timely payment of work performed • Assist TRM as needed in the fulfillment of ongoing projects and efforts • Assist in discovering, creating and implementing new, aggressive methods of business development – while maintaining profitability in all areas of responsibility. • Develop relationships with carriers to market TRM services and secure new opportunities • Become an integral component in the short and long term development of TRM and its ventures Please respond with your resume. Thank you for your interest in TRM. ]]>

<![CDATA[Working under the direction of the Owners’ Project Manager, the purpose of this temporary position is to perform on-site professional and administrative work overseeing the activities of the contractor, subcontractors and other vendors in connection with the renovations and additions to the John D. Runkle School, estimated construction cost of $22.5 million. Five years experience in on-site supervision of construction projects similar in size and complexity. Ability to communicate effectively with contractors, vendors, architects, engineers, governmental agencies, neighbors and Town departments. Strong computer and time management skills, demonstrated experience in the construction industry and knowledge of construction standards and procedures, building codes, safety regulations, ADA and MAAB regulations, and a valid motor vehicle operator’s license required. Knowledge of operation of Mechanical, Electrical and Plumbing systems desireable. The Project Representative is subject to the approval of the Massachusetts School Building Authority (MSBA), which reserves the right to require the Owner (the Town of Brookline) to replace the Project Director at any time during the course of the Project. Resume and Cover letter by September 15, 2010 to: Town of Brookline Human Resources Room 211 333 Washington Street Brookline, MA 02445 ]]>

<![CDATA[Peter Rose + Partners, an award winning, design-focused architectural firm based in Cambridge, MA, is seeking a full time Administrative Assistant / Studio Manager to provide support in the following areas: -Administrative, financial and operational assistance to the Principal on office business and personal matters. -Daily management of the design studio, including answering phones, administrative and financial support, project invoicing, purchasing, preparing weekly office meetings and task lists, managing HR/benefits. -Assist with marketing efforts, tracking award and project announcements, maintaining follow up schedules etc. The ideal candidate will be an assertive, energetic, detail-oriented and flexible self-starter who is interested in joining a growing architectural practice. Strong writing and communication skills required. Expertise in Microsoft Outlook, MS Office Suite required. Knowledge of Adobe Photoshop and InDesign preferred. We offer a strong benefit package. Bachelor?s degree required. Industry experience preferred but not necessary. Please forward resume and cover letter, pdf only, to: smaa@roseandpartners.com]]>

<![CDATA[Job Responsibilities: Support of Existing Operations • Define and implement a maintenance plan for laboratory automation systems • Develop user requirements and provide a Service Level Agreement (SLA) for laboratory equipment • Maintain a diverse set of equipment such as Tecan® liquid handler systems, storage chambers, evaporators, heater/shakers, weighing and dissolution systems • Trouble-shoot and resolve equipment failures and malfunctions • Validate and calibrate systems to ensure optimal performance • Co-ordinate preventive maintenance and service calls for equipment with external vendors Improvement, Optimization and Replacement of Systems • Represent function in multi-disciplinary teams to review and improve processes and equipment • Prepare project plans for equipment improvement and replacement • Perform conceptual design, basic design and generate specifications • Provide scheduling and budgetary estimates • Perform installation, start-up training and documentation Required Skills The ideal candidate will have 2+ years of relevant work experience and a working knowledge of laboratory processes and/or laboratory automation. Ideally, candidates should possess experience with liquid handling systems, thermal systems, optics, robotics/automation, and basic electronics. Applicants should be competent with computer applications such as Autodesk Mechanical Desktop® (AutoCAD) or Inventor and familiar with Electronic Document Management or Product Data Management systems. Education: Candidates are expected to have a BS or MS in one or more of the following: Chemistry, Chemical Engineering, Mechanical, Robotic, or Automation Engineering. Candidate must live local and be a US Citizen or Green Card Holder Commonwealth Sciences, Inc. <a href="http://www.cwsciences.com" rel="nofollow">http://www.cwsciences.com</a> ]]>

<![CDATA[Small consulting firm specializing in hard to solve engineering problems ranging from opto-mechanical to solar energy seeks a self motivated, experienced mechanical engineer for engineering outsource. Up to 40 hours per week depending on projects. Applicant will work offsite and telecommuting ability required. Position requires location within 20 miles of Welleseley, MA and the ability to work assignments independently along with web and face to face meetings. Minimium Qualifications BSME Current Solidworks experience dating back 5 years. Expert detailing and drafting skills including ANSY Y14.5M GD&T 5 years designing precision machine components and sheetmetal parts. Demonstrated knowledge of prototype and production manufacturing processes. Ownership of SW 2010 Professional and active subscription for upgrade to SW2011 Professional. Strong ANSYS FEA skills highly desirable. Serious inquiries only. References required. ]]>

<![CDATA[Located in the Fresh Pond area of Cambridge, we are searching for a BIM coordinator who is able to work in a fast paced environment. Duties include, but are not limited to, the following: • Produce coordination drawings for HVAC piping, plumbing, and fire protection systems • Drafting and designing of lab systems, hospitals, steam plants, and chilled water plants • Attend coordination meetings with engineers, general contractors, and field personnel • Will be required at times to conduct field verifications and conflict resolution on job sites. The following are the attributes we are looking for in this position: • High School Diploma/Trade School • Minimum of 5 years mechanical coordination experience • Proficient with AutoCAD and QuickPen pipe design 3D • Knowledge of Navisworks • Experience on projects utilizing BIM • Knowledge of mechanical design, building codes, piping installation, sleeving/coring layout as well as mechanical equipment layout • Experience with fabrication drawings a plus • Excellent verbal and written communication skills • Team oriented • Close attention to detail • Ability to meet required deadlines The successful candidate with report to the BIM manager Due to the number of resumes we anticipate receiving; unfortunately we will only be contacting those individuals with whom we will be interviewing. ]]>

<![CDATA[One of the objectives of TRM is to be comprehensive, nationwide, site acquisition, construction, and installation organization. We continue to expand our team of well-respected individuals that are interested in building an organization based on their experiences and visions. Initial responsibilities will be focused on Construction Project Management. The following is an outline of criteria, responsibilities and opportunities that will be incorporated into the comprehensive position of a Construction Project Manager. This role is to ensure the efficient flow of the process between the Site Acquisition and Construction divisions of TRM. A general outline of responsibilities is below. • Interface with Site Acquisition team to forecast internal TRM Construction handoff • Schedule and manage TRM and subcontractors • Maintain and update a project tracker • Prepare all documents for bid walks • Coordinate, procure, and track PO’s from the client • Coordinate, procure, and track PO’s to TRM’s subcontractors • Prepare track and deliver closeout packages to TRM’s client • Focus on developing opportunities for TRM • Develop client and industry relationships to bring success to all project(s) • Manage yourself, employees, subcontractors and our clients to meet or exceed established performance goals • Visit sites to perform quality and safety audits to ensure compliance • Ensure adherence to TRM’s Safety Plan striving for 0 Accidents • Conduct bid walks, attend bid walks, negotiate with and direct subcontractors to ensure successful projects. • Provide bids, kitting lists, updated trackers to clients as needed and required. • Work closely with TRM’s personnel and clients to develop a successful team atmosphere and successful projects • Prepare and complete necessary surveys, forms, reports, sketches, photos, exhibits, applications and other tasks related to construction efforts on various projects • Attend weekly status meetings to go over site status – proactively. • Maintain a periodic presence in the clients’ office to facilitate a positive working relationship • Provide other related construction services as the position and projects dictate • Through working with other team members, ensure work product and deliverables are of the best quality and done in a timely manner. • Work closely with team members to ensure proper methods, strategy and approach for timely completion of projects. • Ensure the proper paperwork is in place to allow for timely payment of work performed • Assist TRM as needed in the fulfillment of ongoing projects and efforts • Assist in discovering, creating and implementing new, aggressive methods of business development – while maintaining profitability in all areas of responsibility. • Develop relationships with carriers to market TRM services and secure new opportunities • Become an integral component in the short and long term development of TRM and its ventures Please respond with your resume. Thank you for your interest in TRM. ]]>

<![CDATA[Engineering firm seeking applicants for the following positions: Mechanical Engineer - Massachusetts P.E. registered mechanical engineer with a minimum 10 years of experience. Applicant must have experience in the design of plumbing, fire protection and HVAC systems for public and private buildings. Mechanical Designer - Mechanical designer with a minimum 5 years of experience. Applicant must have experience in the design of plumbing, fire protection and HVAC systems for public and private buildings. Interested and qualified applicants should reply to this listing with cover letter and resume. ]]>

<![CDATA[Designs major portions of single-use systems supporting Millipore's Mobius product line. Mobius products are developed for the world-wide biopharmaceutical market. New Product Development Utilizing computer-aided design tools to develop basic data, layouts, sketches, and notes necessary to quote and propose a designed solution that meets the customer's needs and expectations. Investigates pertinent design factors such as; ease of manufacture, availability of materials and equipment, interchangeability, compatibility of materials, strength-weight efficiency, contractual specification requirements, and cost targets. Coordinates development activities with other organizations (Systems Engineering, Sales, Product Management, Process and Industrial Engineering and Materials) to assure that customer expectations and application requirements are being met. Creates layouts of assemblies and details parts of devices, mechanisms, and structures. Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. It is expected that drawing integrity and accuracy shall be consistent and high quality. Models shall be accurate, view and explosions legible and logical, and drawings shall follow ANSI and Mobius Design standards. Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to appropriate engineers or designers. Manufacturing Support Responsive to requests from manufacturing to assist in debugging design related technical issues. Coordinate and justify design changes when necessary in a timely fashion to include: teaching/training operators, redlining drawings for immediate use on the floor, rapid drawing changes/submission through approvals. Education - ASME (Mechanical Engineering), Certificate in Mechanical Drawing If interested, please apply online at www.millipore.com. Experience - 3-5years of continuous experience as a Designer/Drafter using SolidWorks. Experience with other CAD platforms will be considered. Experience with Oracle is plus.]]>

<![CDATA[We are seeking a talented and highly motivated engineer with a B.S. in Electrical Engineering (M. Sc. Preferred) and a minimum of 7 years of experience (10 years preferred), in the field of consumer audio electronics. To be successful, candidates must have excellent technical skills, be well versed in analog and digital audio circuit design, and demonstrated hands-on problem solving capabilities. Candidates must possess strong interpersonal and organizational skills and be an enthusiastic, positive driving force. RESPONSIBILITIES: • Design and characterization of audio power amplifiers; both linear and switching (class D and H). • Design and characterization of audio power supplies; both liner and switched-mode with in-depth knowledge of all design criteria. • Design and characterization of low-noise audio preamplifiers, including low power, battery-operated designs. • Design of A/D and D/A converter circuits suitable for high-quality audio production and reproduction. • Develop complex mixed-signal electronic circuits, perform simulations, and then build, test and characterize designs on prototype boards. • Work with an interdisciplinary team to execute product designs from concept to production, including design, prototyping, validation, testing and certification. • Perform thorough, root-cause analysis on components and systems when required. • Write and develop functional specifications, design verification plans, and functional test procedures. • Responsible for designing, prescreening, troubleshooting and ultimately solving all necessary EMI/RFI related product certification issues. • Develop early costed-BOM estimates and also final detailed engineering packages suitable for RFQ and manufacture. OTHER REQUIREMENTS: • Experience with FPGAs, microcontrollers, microprocessors and mixed-signal designs. • Well-versed in domestic and international agency certification criteria. • All design must provide for adequate EMI/RFI filtering and shielding to meet domestic and international agency certification. • Excellent understanding and working knowledge of different signal modulation schemes e.g. PWM, frequency modulation, self-oscillating, delta-sigma etc. • Working knowledge of electro-mechanical systems, transducer design, test and characterization. • Expert in schematic entry, layout tools and design for manufacturability. • Have completed a minimum of 5 product life cycles as a key contributor. • Demonstrated ability to move seamlessly between different levels of abstraction. • Must have a strong work ethic and good written and verbal communication skills. SKILLS & EDUCATION • B.S. / M.Sc. Electrical Engineering with 7-10 years proven experience. • Working knowledge of Microsoft Office suite. • Project management knowledge and experience. • Excellent professional and personal references are required. ]]>

<![CDATA[JOB Descirption: Looking for a new grad or Jr Engineer with 1-2 years experience in Computer or Electrical Engineering for a Wireless upgrade to 4G technology. The position is 2 months in duration. Need to know basic RF principles and how to use a Spectrum Analyzer and RF Power meter. No DUIs and clean driving record is a must. Car needed to get to work. Is full time and requires overtime. Upgrade to network will be at night midnight to 8am. Could lead to more projects. Please email resume. ]]>

<![CDATA[Small, well established Engineering and Land Surveying firm seeks a uniquely qualified person to fill an immediate need for drafting and civil design projects. Candidate must be a motivated self starter with specifically applicable experience. Little or no training is available and production begins on day one. The candidate will be responsible for more than half of the drafting work produced by the firm. In addition to being proficient in AutoCADD candidate must be able to create plans from raw boundary fieldwork. Candidate MUST demonstrate thorough knowledge of the design standards and permitting requirements of Boston public agencies. Others need not apply. Knowledge of Carlson Software and/or ability to perform survey fieldwork is an added advantage to achieving this position. Our firm is small and requires employees accept multiple and varied tasks. The size of the firm offers great opportunities to participate in the workings of the business as well as in production and offers good opportunities to advance professionally and financially. ]]>

<![CDATA[ARCHITECT: project architect or project manager opportunity. Experience with interior architecture required for Boston located architectural firm. Ten years experience and registration required. Project types include corporate, commercial, early education and recreation. Revit skills are beneficial. Immediate start. ]]>

<![CDATA[ATR/Treehouse, a well respected systems integrator and Production Company in Providence, Rhode Island, is actively seeking a full time designer and engineer for our Installations Department. Job Description: ATR/Treehouse services a variety of corporate, higher education and municipal clients in the Rhode Island and Massachusetts areas. The designer/engineer will work on a variety of projects ranging from single classroom designs and installations to pre-designed, large scale bid packages that include complex system integration. A broad knowledge of video/audio conferencing, display, room control, lighting and digital signage is key. Applicant must also have an intricate knowledge of products by Crestron, AMX, Extron Polycom and other leading industry manufacturers. Responsibilities: • Site Surveys • System Engineering & Design • Estimating & Proposal Preperation • CAD • Technical Consultation • On-site Testing and Commissioning • DSP and Control Programming • Creation of System Documentation Skills and Qualifications: • Four year college degree • CTS, CTS-I or CTS-D preferred • CAD, Vector Works, Quickbooks, Microsoft Office and other computer skills • 5 Years experience in AV design and implementation • Crestron programming training and certifications • Excellent communication skills, oral and written • Hands-on technical experience preferred • Ability to maintain a professional demeanor and positive attitude under pressure. ATR/Treehouse offers a competitive compensation program including health/dental, 401k, Section 125, vacation, sick time, paid holidays and more. To learn more about our company please visit us at atrtreehouse.com. If you are interested in becoming part of an energetic team concerned with quality and customer service, send your resume today to: hr@atrtreehouse.com Treehouse Productions Management Inc. is an Equal Opportunity Employer ]]>

<![CDATA[Established MEP Consulting firm located in South Station area seeking experienced HVAC Design Engineers experienced in building mechanical systems. This is a part time position on call basis. Minimum 10-15 years experience and PE registration is a must. Send resumes, no phone calls please.]]>

<![CDATA[Terrafugia, the developer of the Transition® Street-Legal Airplane, is currently looking for an exceptional engineer to join our team. Candidates should be self-starters who are willing to ask questions, be a contributing part of a fast-paced team, and be proactive as we push the boundaries of traditional aviation. In addition to enthusiasm and a can-do attitude, we’re looking for mechanical or aerospace engineers with the following: • Design engineer with 5+ years’ experience • Experience with the design-build-test cycle • Familiarity with composite materials & machining processes • Proficiency with SolidWorks and Microsoft Office • Familiarity with CATIA v5 and Fluent is a plus • A desire to work in a fast-paced entrepreneurial environment • A desire to do more than sit at a computer each day. You must be a doer and a builder. • An aviation background & pilot training is a plus • US Citizenship required Please send a resume and cover-letter via email if you have what it takes to help us take our development program to the next level. Please specify engineering position in the subject line. More information on Terrafugia can be found online at <a href="http://www.DrivenToFly.com" rel="nofollow">http://www.DrivenToFly.com</a>]]>

<![CDATA[Osram Sylvania, one of the world's leaders in lighting solutions, is searching for a successful Applications Engineer to participate in the Solid State Lighting technological revolution. This position is in our Outdoor Street, Road and Area Lighting group. As a vital sales support engineer, you will be involved in activities ranging from pre-sales systems consulting through post-sales installation and implementation support. Responsibilities include: Provide technical support in sales presentations Conduct product demonstrations Provide technical assistance in the installation and maintenance of company products Ensure that the system is functioning according to specifications Answer customer inquiries without relying on established guidelines Work on problems of moderate to complex scope Requirements: BS degree in Engineering required plus minimum 5 yrs related experience Ability to communicate complex technological information to non-engineers Highly developed customer-facing communication skills Cross function support experience SSL/LED knowledge required <a href="http://www.cytiva.com/light/applyX.asp?light?light5114?mpiper?38" target="_blank" rel="nofollow"> For quick consideration Click here to apply </a> ]]>

<![CDATA[Sr. Building Science Engineer/Scientist AEGIS Engineering Services, Inc. of Rockland, MA is currently seeking a full-time Sr. Building Science Engineer/Scientist who has a degree in engineering or science and a minimum of ten (10) years of progressive technical experience with proven ability in project management and written communication. Position Outline: The candidate will be responsible for all aspects of project management as it relates to building science work. Specific Responsibilities: • Perform failure analysis inspections of residential and commercial properties • Prepare written reports summarizing findings and recommendations for repair • Act as a technical coach and mentor to the members of the team • Ensure that all deliverables of the division are of the highest quality The successful candidate should be able to bring: • Experience in building condition assessments, design of building repairs and mechanical upgrades • Excellent written communication skills • Ability to work effectively and efficiently in a high demand, fast paced environment and to deal professionally with clients and co-workers • Exceptional leadership, team building and motivational skills The position offers a competitive salary, benefits package, professional development opportunities and much more. To be considered please forward your CV and a brief cover letter via email. No phone calls or recruiters please. Thank you in advance for you interest. We regret that we can only respond to candidates chosen for an interview. ]]>

<![CDATA[I offer basic, intermediate and advanced private tutoring in REVIT ARCHITECTURE, REVIT STRUCTURAL REVIT MEP NAVISWORKS AUTOCAD 2D/3D, 3D MAX, Over 10+ years of extensive experience working in the field of architectural/Engineering firm specializing in commercial, retail and residential design. I can give you personalized tutoring in a relaxed atmosphere at a very reasonable price. Get personalized attention from a highly experienced teacher who has the patience to keep you comfortable and the knowledge to make you a pro. Develop a schedule that works for you at reasonable rate. Work at a pace that’s right for you..Time very flexible Are you starting out or just plain scared? I can get you comfortable on your system. I'm also available for corporate training One-on-one training at my office or Online.... For details call Ken. on 631-455-2066 Work samples Check: <a href="http://swainbim.com/?page_id=14" rel="nofollow">http://swainbim.com/?page_id=14</a> Email: swaincad@hotmail.com Website: www.swainbim.com ]]>

<![CDATA[Hands-on geotechnical/geosynthetics laboratory experience finding the engineering properties, i.e. permeability, stability, etc. of samples. Learn how to conduct tests on materials by following standard testing procedures and reporting the results for client reports. Minimum high school degree with good math and science knowledge required. Candidates with Civil Engineering, Chemistry experience or education will be considered. All candidates who send a resume will be considered. ]]>

<![CDATA[Our client provides discrete manufacturers with software and services to meet the globalization, time-to-market and operational efficiency objectives of product development. Using the company?s PLM and CAD solutions, organizations in the High-Tech, Retail and Consumer Industries are able to support key business objectives and create innovative products that meet customer needs and comply with industry regulations. Marketing Manager They are looking for a Marketing Manager who will play a critical role in the development, implementation and program management of maintenance programs and asset development across multiple product lines. We are looking for a strong individual contributor with relevant marketing experience seeking a role where he/she will help generate significant positive impact on maintenance revenue. Responsibilities ? Collaborate with Business Development team and product Business Units to drive incremental maintenance revenue. ? Interface with Corporate Marketing program managers and Siebel teams for joint campaign planning and execution ? Participate in recommending and developing segmentation strategies, targeting criteria and testing plans to achieve objectives. ? Manage specific marketing campaigns, as noted below, using email and other activities to drive maintenance revenue Preferred Qualifications: ? 5-10 years of Marketing Program Management experience in a large technology/engineering environment is highly preferred ? Bachelor?s degree - preferably with concentration in Business, Marketing- MBA preferred ? Cross-functional team management skills ? Ability to manage multiple projects with a sense of urgency required to work in a deadline driven environment. ? Diligent, flexible, resourceful, independent worker with a strong work ethic. ? Strong communicator capable of delivering concise messages to various audiences. ? Positive attitude, team player with professional demeanor. ? Intellectual curiosity and strong willingness to learn software solutions products Company Perks: ? 401(K) ? Healthcare ? PTO (paid time off) ? Tuition Reimbursement ? Holiday Pay ? Extensive management and employee training development ? Onsite fitness center and cafeteria For immediate consideration please contact your KNF&T consultant. If you are not registered with KNF&T, please submit your resume to Carl Narcisse at cnarcisse@knft.com KNF&T Staffing Resources has consistently provided high quality placement services to businesses ranging from start-ups to the Fortune 500 in the areas of Administration & Creative, Accounting & Finance, and Human Resources. In business for more than 25 years, KNF&T?s success stems from its strong commitment to provide the highest level of service to clients as well as candidates. Positions include: Accountants, Administrative and Executive Assistants, A/P and A/R staff, Chief Financial Officers, Clerical and Data Entry staff, Controllers, Customer Service Representatives, Human Resources professionals, Medical Assistants, Nurses, Office Managers, Paralegals, Receptionists and many more. Visit our website: www.knft.com for further information. KNF&T: The right fit.]]>

<![CDATA[SAK Environmental has an opening for a field technician with 0-2 years of experience. Experience in solid waste and recycling, sampling programs, AutoCAD, surveying and construction inspection are highly desirable. Primary duties include on-site field inspections and sampling, with office assignments including CAD, preparing tables and boring logs, and report preparation. An associate’s degree (or higher), OSHA-10, OSHA-HAZWOPR and an interest in environmental compliance is preferred. Excellent communication, computer, and organizational skills, and a high degree of reliability/responsibility and integrity are required. The position will require approximately 50% of time at job site locations (primarily in Eastern MA, Central MA, and Southern NH). Email resume to info@sakenvironmental.com. SAK Environmental is an Equal Opportunity Employer. About SAK Environmental (www.sakenvironmental.com) SAK Environmental is a small, privately owned environmental consulting business founded in 2003 and based in North Andover, Massachusetts. We specialize in pollution assessment and remediation, sustainable development, environmental support during construction, and environmental permitting and compliance. Our approach is to deliver technically sound advice and practical solutions enabling our clients to proceed with their initiatives with confidence and peace of mind. We strive to promote sustainable development and environmentally compatible business practices to allow business, industry and communities to thrive. ]]>

<![CDATA[SAK Environmental has an opening for an environmental scientist or engineer with 0-2 years of experience. Applicants should have a bachelor’s degree in engineering, geology, chemistry or related. Experience in ASTM environmental assessments, USEPA Brownfields, AutoCAD, construction inspection experience, OSHA-10 and OSHA-HAZWOPR training is highly desirable. Duties include researching and preparing environmental reports and documents, field inspections and sampling, and other duties as required. Excellent communication and computer skills and a high degree of reliability/responsibility and integrity are required. Please email a cover letter and a resume to info@sakenvironmental.com. No phone calls please. SAK Environmental is an Equal Opportunity Employer. About SAK Environmental (www.sakenvironmental.com) SAK Environmental is a small, privately owned environmental consulting business based in North Andover, Massachusetts. We specialize in pollution assessment and remediation, sustainable development, environmental support during construction, and environmental permitting and compliance. We strive to promote sustainable development and environmentally compatible business practices to allow business, industry and communities to thrive. ]]>

<![CDATA[SolarFlair Energy, Inc. is a fast growing solar energy company based in Framingham, MA and we have an opening for a Project Manager to join our team. SolarFlair designs, sells and installs solar electric (PV) and solar hot water systems (SHW) for commercial and residential customers. We are looking for an applicant that can learn quickly and communicate well with customers. The ideal candidate has the ability to excel in a fast-paced startup environment. As Construction Project Manager you will be responsible for the oversight and management of the entire project cycle for commercial and residential solar installation projects. The ideal candidate has a proven ability to make independent decisions when it comes to installing projects on-time and within budget, all the while maintaining and adhering to our high standards for quality and customer satisfaction. Your proactive communication with all stakeholders throughout the project will contribute to your success in this role. Responsibilities: * Define installation schedule and budget that meets contract requirements; * Develop and manage the project schedule using Gantt charts; * Support design process through permitting; * Materials and equipment planning and procurement; * Provide excellent customer service throughout project life cycle; * Manage submittal process; * Manage project invoicing and progress payments Requirements: * BS/BA in Engineering, Construction Management, or other technical field; * 3-5 years of experience in Construction Project Management required; * Certifications: CSL, NABCEP, and Certified Project Manager (CPM) certification preferred; * In-depth knowledge of construction products, practices, subcontracting and project workflow; * Detailed knowledge of construction budgets and schedules; * Ability to prioritize and manage multiple projects simultaneously and independently with a high level of organization; * Excellent written and oral communication skills, Professional and courteous phone and email etiquette is required; * Professional appearance and demeanor at all times is required; * Advanced computer skills including project management software, CAD, and MS Office, PowerPoint, Excel, Word. To apply for this position, send an email with a paragraph or two explaining why you would make an excellent fit for this position. Attach your resume, along with two professional references and your compensation requirements. Interviews will be scheduled for qualified applicants. See www.solarflair.com for more information. ]]>

<![CDATA[Nobis Engineering, Inc. is an engineering and consulting firm seeking a full time experienced GIS Specialist to serve as the primary GIS resource for a rapidly growing environmental and civil engineering firm. Will be the company lead for the effective implementation of GIS technologies to support existing projects, as well as innovative strategic planning for future growth. In this role, will serve to design and utilize GIS and related technologies in support of environmental and engineering decision-making. • Assists users in identifying and defining appropriate applications of the GIS associated products and works with users in planning and developing specialized GIS applications to meet specific user needs. • Develops and maintains applications that facilitate GIS access by inexperienced users (e.g., menu driven procedures, web-based interfaces). • Designs and maintains logical geodatabases and develops standards related to GIS data entry and updating. Oversees GIS data automation and maintenance. • Develops GIS and geodatabase documentation including: data standards and definitions, coding schemes, operational procedures, and quality assurance programs. • Conducts in-house training on GIS implementation and application projects. • Compiles and integrates tabular data and map data for automation from diverse sources such as relational databases, survey data, CADD files, existing maps, aerial photography, and satellite imagery. • Performs map editing, quality control checking, and basic geoprocessing tasks. Manages the spatial and tabular databases of the GIS as well as project workspace digital map layers and data files. • Designs high-quality map and graphic products for GIS output. Bachelor’s degree with 3-5 years of professional experience and advanced proficiency with ESRI suite of software products. Experience with AutoCAD is a plus. Requires a thorough understanding of GIS and geodatabase theory and practice, including: • Geodatabase and GIS application design principles; • Development and implementation of efficient workflow processes for GIS applications, data collection methods, data standardization, and geocoding; • Techniques and procedures to create and maintain automated map libraries and data dictionaries; • Map drafting with knowledge of land surveying techniques and geodetic control principles; • Cartographic design principles, graphic composition, and map production techniques; and • GIS implementation involving large data sets. Strong communication skills (written and verbal) as well as technical skills to interact effectively with project managers and technical teams for the planning, execution, and maintenance of GIS applications and products. Consulting or scientific/engineering experience or exposure is a plus. Must have a valid driver’s license and access to a vehicle. Must be able to travel periodically. Send resume to: Attn: Human Resources Nobis Engineering, Inc. 18 Chenell Drive Concord, NH 03301 email: hr@nobisengineering.com Fax 603/224-2507 (No phone calls, please.) www.nobisengineering.com. EOE ]]>

<![CDATA[The candidate selected for this contract position will work out of the Chelsea Water/Wastewater facility and provide programmable logic controller (PLC) and Human Machine Interface (HMI) software programming support. Some of the essential duties are participating in the installation, maintenance and monitoring of the Mass. Water Resources Authority’s wide area Supervisory Control and Data Acquisition (SCADA) system as well as reviewing and updating the PLC ladder logic and HMI software. QUALIFICATIONS: Education/Experience: •BS Degree in Electronic/Electrical Engineering or equivalent Special Requirements: •Four years experience in ladder logic and HMI programming in the water/wastewater industry is preferred. Allen Bradley SLC and GE iFIX Software is required. Valid Massachusetts Class D driver’s license. Applications are available on line at www.mwra.com . Mass. Water Resources Authority is an Equal Opportunity/Affirmative Action Employer M/F/D/V ]]>

<![CDATA[ Job Description: Part-time assistant for 10 to 20 hours per week to provide both Office Management and Design assistance in my home office in West Newton. Preference given to a candidate familiar with the design industry, Design Manager software, AutoCad and Revit. This position will grow in scope to encompass more design work commensurate with the level of skills, and professional maturity. Office Management Duties include: - Proposal Preparation - Invoicing and Purchasing - General office organization - Support account management Assistant Designer Duties: • Prepare furniture layouts, floor plans and elevations in AutoCad and Revit as needed • Perform on-site measuring to create construction documents and concept plans • Maintain materials library • Create work orders for vendors • Interface with clients Required Traits: • Strong work ethic • High self-motivation • Effective written and oral communication skills • Collaborative and respectful This position offers an excellent opportunity for the selected candidate to develop and enhance professional and interpersonal skills in a small, collegial and growing practice. Consideration to candidates who send a resume and portfolio. ]]>

<![CDATA[Robson Forensic, a multi-discipline forensic engineering firm with offices throughout the U.S., seeks a licensed electrical engineer to join our Electrical - Fire and Explosion Practice group. We need an electrical engineer with broad expertise in design, installation, construction, maintenance, and troubleshooting of electrical components and systems in power generation, industrial, automotive, commercial, residential, educational, and government applications. This is a fulltime position. Requirements: <ul> <li>Electrical Engineering degree <li>PE or ability to obtain PE <li>10+ yrs. of electrical system design, installation, and troubleshooting experience <li>Excellent analytical and communication skills </ul> Email your resume and a cover letter highlighting your qualifications to Nancy Chillas at <a href="mailto:jobs@robsonforensic.com" rel="nofollow">jobs@robsonforensic.com</a> or apply online at <a href="http://www.robsonforensic.com/Careers.aspx" rel="nofollow">Careers at Robson Forensic</a>. Reference: CL-EE-BOS <a href="http://www.robsonforensic.com" rel="nofollow">Forensic Experts at Robson Forensic</a> ]]>

<![CDATA[MECHANICAL DESIGN ENGINEER Our long term client, Acorn Product Development, is a top innovator in Product Design and Engineering for Global Manufacturability. They have offices in Silicon Valley, Boston and China. Fortune 100, 500 and numerous hot start-ups, hire this client company to participate in the design of their newest offerings. Acorn focuses its design talents on Consumer Products, Computing, Medical Devices and Networking Products. Working at Acorn is an engineer’s dream. You will learn more, grow faster, work with an excellent team and be appreciated and rewarded for your contributions. If our requirements fit your background, we want to talk with you! This job is located in Cambridge, MA office and reports to the Engineering Manager, Boston. FOR THIS JOB, YOU NEED: • BSME • 2-5 years working in companies as a Mechanical Design Engineer doing system design, not components • Broad based M.E. Design experience in 1 or more of the following markets: o Consumer products o Computers o Networking o Biotechnology and/or Medical Devices (concept through clinical controls) WE WOULD LIKE YOU TO HAVE: • Excellent communication skills • Some background working in smaller companies • Solid experience working with clients, vendors and consulting • Your background should include: o Working knowledge of design using Injection Molded Plastics and/or Sheet Metal o Pro/E Wildfire and/or Solid Works o Hands-on performance in shop/lab work PLUS: • M.E Analysis experience in: o Strength of materials o Heat transfer o Tolerance analysis o FEA o Shock and vibration o Design for manufacturability (high/low volume) o Project Budgeting/Scheduling/Management o Project and Technical Reporting US Citizenship or a Green Card required. Contact Adrienne Landy, President, World of Work Consultants, LLC: wowcltd@comcast.net for immediate consideration! ]]>

<![CDATA[This is the opportunity of your life, we are looking young masonry estimator able to grow with us. We can training. Sent your resume at Fax# 508-807-1115 0r call for an appointment at 800-518-6341' ]]>

<![CDATA[We are a full service architectural firm focusing on the marketing needs of the residential and commercial real estate community. We are seeking a highly motivated, self sufficient individual to grow with us as a Field Measurer. The position will play a key role in our company development and the right candidate will have the opportunity to grow with us. Responsibilities: Travel to residential and commercial properties to sketch, measure and create as-built drawings Take professional photographs using wide angle camera for real estate needs Upload all materials to online server the day of each job Requirements: Proficient in drafting and working on AutoCAD and/or Vector Works Proficient in sketching and measuring properties in the field Knowledge of taking hi-resolution photographs and camera work Excellent customer service and communication skills Flexible schedule and reliable transportation a MUST Compensation based upon experience, education and ability. All equipment is provided. Job includes traveling everyday to different projects, so you must have reliable transportation and be willing to drive every day. Daily responsibilities will change quickly in this fast-paced environment, multitasking and time management is essential. Please send resume and sample portfolio to be considered. ]]>

<![CDATA[Hardware/software systems manager Company Description: We are an emerging medical device company developing an innovative technology for coronary artery bypass. Our solution involves creating a conformal polymer support around the outside of a saphenous vein segment during the surgical procedure to reinforce it against overexpansion when exposed to arterial pressure. We are a small team of highly talented individuals, singularly focused on this breakthrough technology and looking for a key resource to help realize our goals. Job Description: The Hardware Systems Manager will lead the hardware and software development and test verification at the company and be a leader in the test, design and development of the company's technology platform. This will include electromechanical design and development, mixed signal, analog, digital and software components. Required Skills and Experience: • Significant experience and record of accomplishment with medical hardware and software. • Strong knowledge and hands-on experience applying existing harmonized standards. • Experience and ability to manage multiple external vendors • Knowledge of mixed-signal, analog electronics and signal processing • Excellent problem solving skills and ability to work with a cross-functional team to develop solutions to complex technical challenges • Must be able to keep detailed laboratory notes and write technical reports • B.S. degree in Electrical Engineering, Biomedical Engineering or Physics from a leading institution; good GPA required • A minimum of 6 years of industry experience Desired Skills: • Project management and planning • Knowledge of circuit board design and layout tools • Programming knowledge of C/C++; LabVIEW and Matlab • Experience in medical device development The ideal candidate will be a self-starter and understand the larger system context. The successful candidate will work with a multidisciplinary team of engineers and be involved with the company’s preclinical and clinical work. Title and salary will be commensurate with experience. This is an exciting and fast-paced work environment, with the chance for individuals to make an impact in cardiac medicine. ]]>

<![CDATA[Fueled by a dedicated workforce, AMERESCO is the premier provider of energy efficiency and renewable technology solutions. From conservation to renewable energy generation, AMERESCO employees have developed and implemented over $4 Billion in energy savings solutions that help our customers utilize clean and sustainable resources. We currently seek Engineers with Solar PV experience to partner with our Regional Teams in the pre-sale development of Solar PV Power projects for industrial, commercial, and institutional customers. RESPONSIBILITIES: <ul><li>Coordinate customer site visits to investigate project site conditions and suitability for solar PV system installations.</li><li>Perform detailed engineering reviews of project site conditions, including evaluation of shading, site obstructions, roof conditions, and electrical interconnection conditions.</li><li>Participate in project pre-bid customer meetings.</li><li>Develop project conceptual designs - AutoCAD Solar PV layouts, one-line electrical drawings, and equipment selection - based on site observations, conformance with building codes, and sound engineering practice.</li><li>Provide energy production estimates based on observed site conditions, conceptual system design using PV Watts and other software programs.</li><li>Assist Project Team with developing and producing proposals, technical reports, cost estimates, and presentations.</li><li>Ensure compliance with company, industry, trade, and jurisdictional safety standards, practices, codes.</li><li>Foster effective and positive business relationships with all parties throughout project phases</li><li>Perform other duties as required.</li></ul> REQUIREMENTS: <ul><li>BS Engineering plus minimum 3 years work experience focusing on Solar PV power site assessment, project design, and installation oversight.</li><li>Working knowledge of industry standards, including IBC and NEC.</li><li>Demonstrated ability to analyze, quantify, and design proposed conceptual Solar PV systems.</li><li>Knowledge of measurement and verification, project cost estimating, accounting desired.</li><li>Hands on project site engineering and construction management involvement highly desirable.</li><li>Familiarity with Solar PV system simulation and related software.</li><li>Professional registration or educational progress toward PE, CEM, LEED desired.</li><li>Excellent verbal, written, computer and technical communication and presentation skills.</li><li>Valid Drivers License issued by state of residence and in good standing.</li><li>U.S. Citizenship or U.S. Permanent Resident status required.</li><li>May be required to pass security clearance investigation.</li><li>Up to 50% travel required to project sites, mostly located in the region.</li></ul> Interested individuals are encouraged to APPLY DIRECTLY through the AMERESCO Company Website for confidential and immediate consideration. Please visit <a href="http://careers.ameresco.com" rel="nofollow">http://careers.ameresco.com</a> to submit your resume, cover letter, sample project history, geographic location preference, and salary information for immediate and confidential consideration. DIRECT Applicant Response Preferred. AMERESCO challenges the brightest, most talented and creative individuals in the industry by providing an environment that embraces initiative, diversity, and achievement along with comprehensive rewards, including people-oriented insurance, investment, and incentive plans. AA/ EEO.]]>

<![CDATA[We are looking for an experienced Residential Estimator with some experience in Light Commercial Wood framing. Prior experience is a must. Position would have the potential to become a full-time job. Candidate would need to be able to be handed a set of plans and develop a comprehensive material list to present to a contractor. Position need is immediate and office space can be provided or you would be able to work form home.]]>

<![CDATA[Immediate residential work for drafter/designer. Must be experienced, very proficient and productive with Revit and AutoCAD.]]>

<![CDATA[DiGiorgio Associates Inc. is an Architecture/Engineering/Design/Construction firm located just steps from the TD Garden and North Station. We are a firm that specializes in healthcare facilities and we are dedicated to creating appropriate facilities that meet the needs of our clients. We are currently in the process of developing and learning Revit in order to make it a full-time tool for our company. In order to ensure that we continue to meet our clients’ deadlines during this transition, we are currently conducting a search for a temporary (three to four months) Revit Specialist to assist us in this process. The Revit Specialist is responsible for creating and modifying Revit templates, along with assistance with family creation. This individual works closely with the Project Captain and other Drafters assigned to specific projects to assure they have the support required to complete a project on time. Ideal candidates will have: * Advanced understanding of Revit Architecture/MEP 2010 & 2011 * Ability to create and manipulate complex Revit families * Ability to create and modify Revit templates * Capability to travel to and from a satellite office in Maine To apply, please send your resume and cover letter, including salary requirements, to DiGiorgio Associates Inc. Human Resources 225 Friend St. Boston, MA 02114 jobs@dai-boston.com ]]>

<![CDATA[DiGiorgio Associates Inc. is an Architecture/Engineering/Design/Construction firm located just steps from the TD Garden and North Station. We are a firm that specializes in healthcare facilities and we are dedicated to creating appropriate facilities that meet the needs of our clients. We anticipate multiple design projects in the coming months, so we are currently conducting a search for three temporary (three to four months) Senior Drafters. Senior Drafters are responsible for drafting/designing details and must be capable of doing assigned work with little, if any, supervision. In this position you will work closely with the Project Captain and other Drafters assigned to specific projects to assure coordination of the effort to its completion. Ideal candidates will be proficient in Autodesk Architecture 2009 and possess a thorough understanding of building codes, office and industry standards, construction detailing and contract document production. Three to six years of experience is required. Healthcare experience is preferred. Revit Architecture 2010 experience is a plus. To apply, please send your resume and cover letter, including salary requirements, to DiGiorgio Associates Inc. Human Resources 225 Friend St. Boston, MA 02114 jobs@dai-boston.com ]]>

<![CDATA[Liquid Solids Control, Inc. is seeking a Service Engineer with a background in Instrumentation / Electronics… “IT or Programming” experience also considered. Summary: Liquid Solids Control is a small manufacturing company that has been in business for over 30 years in Upton, MA. Our company produces a small computerized / optical process instrument used in the chemical, pulp & paper and food industries to name just a few. Details: We are looking for a technical person for a full time position. This position could be fulfilled by an instrumentation technician, electrical /optical engineer or talented software engineer that is willing to work with their hands, freedom for travel 30 % of the time for field service and provide the best in customer service. Candidate will be working at the office 70 % of time with the remaining 30 % +/- being in the field. During your time at the factory you would be intimately involved will several areas of the manufacturing process: testing electronic boards and / or components, building assemblies, calibrating instruments, creating documentation and providing technical service support over the phone and e-mail. Should the candidate have engineering or software background there would be opportunities to be involved in refining existing systems, as well as, developing new systems in the future. Exceptional analytical skills and the ability to test and troubleshoot to the component level are key. Specific knowledge in troubleshooting embedded Linux based hardware and TCP/IP is an advantage. Fieldwork would include performing Start-up Assistance / Training, Calibration, Maintenance, Troubleshooting and Repair on Equipment. Whether in the factory or out at the customers job site, the candidate needs to foster positive relations by being proactive, professional and respectful at all times. Should also communicate effectively with the customer and practice good customer service including sales support if needed. ]]>

<![CDATA[Job Summary MicroCAD is seeking to hire a sales champion and a dynamic leader. The Sales Manager is responsible for the development and performance of all sales activities in New England and New York Territory. They will staff and direct a sales team and provide leadership toward the achievement of maximum profitability and growth in line with the overall company goals. It will be necessary to create and execute a strategic plan to expand the customer base. The Sales Manager develops training and educational programs for both the clients and the sales team. Job functions include: Sales: • Responsible for the performance and development of the Account Executives • Prepares action plans by individuals as well as by team for effective search of sales leads and prospects • Conducts one-on-one reviews with all Account Executives to build more effective communications, to understand training and development needs, and to provide insight for the improvement of Account Executive’s sales and activity performance (key performance initiatives) • Create initiatives for Account Executive activities and generate weekly reports on the results (Examples: Weekly Reporting on Call Activity, Quotes generated, Deal Registration, Meetings set up, Pipeline etc.) • Provides timely, accurate, competitive pricing while striving to maintain maximum profit margin • Maintains accurate records forecasts • Creates and conducts proposal presentations and RFP responses • Assists Account Executives in preparation of proposals and presentations • Insures that all Account Executives meet or exceed all activity standards for prospecting calls, appointments, presentations, proposals and closes • Lead by Example (Prospecting, Meetings, Presentations and Closing opportunities) • Increase Sales Corporate: • Develops a business plan and sales strategy for the New England and New York Territory that ensures attainment of company sales goals and profitability • Initiates and coordinates development of action plans to penetrate new markets (Construction, sub consultants & Owner Operators) • Provides timely feedback to Owner regarding performance • Controls expenses to meet budget guidelines • Responsibility for P & L • Adheres to all company policies, procedures and business ethics codes and ensures that they are communicated and implemented within the team • Recruits, tests, and hires Account Executives based on criteria agreed upon by Owner • Provide accurate sales forecasts to Owner and Autodesk • Continue to grow relationship with Strategic Partners • Evaluate new technologies that will help Grow or strengthen Current Market supported • Delegate authority and responsibility with accountability and follow-up • Conducts regular coaching and counseling with Account Executives to build motivation and selling skills • Maintains contact with all clients in the market area to ensure high levels of client satisfaction • Selling skills and work habits • Demonstrates ability to work well with and be a leader among all company employees • Assists the Marketing team in the development and implementation of marketing plans • Work with the technical team to help improve their support the sales team in presales activities and uncover new opportunities in existing client base Education/Experience Must have a bachelor’s degree, 10 years of progressive experience in sales, and at least 4 years experience as a sales manager. Experience with the architecture, engineering and construction (AEC) market is a must. Strong communication and presentation skills are a must. The candidate must be experience in both the software sales process and selling to the AEC market. Candidates must be familiar with CRM software such as ACT, Goldmine, Sales Force or similar, and have a history of proven success. The position is not exclusively one of management but of product and service sales as well. The candidate must be able to lead by example. ]]>

<![CDATA[Southern New Hampshire contractor in need of earth work and utilities estimator. Carlson Software and minimum 10 years experience. Call 1-978-375-7001]]>

<![CDATA[2Is Inc. is seeking a resourceful and diligent individual to join our Engineering team. In 2009, we were recognized as the 249th fastest growing, privately held, US Based Company by Inc. Magazine. We were founded in 2002 to source small quanities of mission critical repair parts, priced fairly, and delivered fast to the Department of Defense (DoD) and defense OEMs. We have expanded our business to include providing Engineering Technical Services (since 2005) and Software Services (since 2007) to the DoD. Applicant must be technically proficient in reverse engineering automotive and aerospace parts which are primarily mechanical or electro-mechanical. Critical skills include: use of inspection equipment to obtain accurate parametric data, Solidworks CAD modeling incorporating GD&T requirements and familiarity with ASTM/ANSI material and enviromental testing requirements. Experience with US Military or FAA source approval process is a plus. The primary scope of responsibilities will involve completing individual projects and providing technical oversight of projects completed by other engineers. Addionally, customer interaction on technical issues is a routine task of the position. Applicant must be a US citizen. ]]>

<![CDATA[One of our customers in the Metro West area currently has a long-term contract opening for a PCB Designer with Mentor Expedition and DxDesigner tool suite experience. Candidates MUST have current experience on these tools--the customer is currently using version WG2007.8. Applicants must be US Citizens and be eligible to receive Secret Security Clearances in order to be considered for this position. Additional Requirements/Skill Set Desired: -AutoCad, SolidWorks and Linux OS experience. -IGI or Valor DFM tools. -Ability to interface with electrical engineers, mechanical engineers, and thermal and mechanical analysis teams. -Experience with RF design and BGA. This long-term contract opening is available through Randolph Associates, Inc., a staffing agency that has specialized in placing professional engineers in contract and permanent positions since 1984. Please visit us on the web, at www.greatjobs.com. We look forward to working with you! -Randolph Associates, Recruiting Team]]>

<![CDATA[Seeking Resident Engineers (Contractor) to monitor various public construction projects statewide, including CM @ Risk, new constructions, renovations, and environmental issues. The Resident Engineer will: observe/document daily ongoing construction to monitor job progress; ensure that the General Contractor is in compliance with project plans/specifications; schedule/coordinate all on site testing in conjunction with the Designer and ensure all tests are conducted properly; confer with Designer, General Contractor, and Project Manager/Project Engineer to maintain project quality control, continuity, consistency and ensure adherence to the contract documents, applicable construction methods, procedures and safety requirements, assist in the preparation of the general contractor performance evaluation and the final release. Preferred: Applications should have a minimum BA degree in engineering, architecture, or environmental and/or 10-20 years supervisory construction experience. Qualified candidates will possess a thorough knowledge of building construction methods such as CM@Risk as well as familiarity with applicable state/federal codes. Licensed registered construction supervisor preferred.]]>

<![CDATA[Rist-Frost-Shumway Engineering (RFS), a 65 person consulting engineering firm located in Laconia, New Hampshire, is seeking Entry-Level Designers to join our talented and team focused staff. Our project types include college/university, health care, laboratory, private secondary schools, public K-12, central plant, commercial, industrial, government, and historic preservation -- all with a focus on sustainable design. Positions require REVIT and/or AutoCAD proficiency and interest in design of buldings and building infrastructure systems. A.S. or B.S. in engineering or architectural technology required. This is an opportunity to work on large-scale, high-profile building projects throughout the Northeast. RFS offers excellent salary commensurate with experience, liberal benefits package including 401K company match, and profit sharing. Please send resume/work history in confidence to: Rist-Frost-Shumway Engineering, P.C. Attn: W.E. Drake 71 Water Street Laconia, New Hampshire 03246 Email: wdrake@rfsengineering.com ]]>

<![CDATA[Rist-Frost-Shumway Engineering (RFS), a 65 person consulting engineering firm located in Laconia, New Hampshire, is seeking a Mechanical Piping Designer to join our talented and team focused staff. Our project types include college/university, health care, laboratory, private secondary schools, public K-12, central plant, commercial, industrial, government, and historic preservation -- all with a focus on sustainable design. Position requires 10+ years combined experience with design and/or hands-on construction of mechanical piping systems for central utility plants and district energy distribution (steam, hot water, and/or chilled water). Strong computer skills required: AutoCAD proficiency preferred. Experienced industrial pipe fitters with an understanding of system layout, sizing parameters, stress analysis, etc., are encouraged to apply. This is an opportunity to work on large-scale, high-profile building projects throughout the Northeast. RFS offers excellent salary commensurate with experience, liberal benefits package including health, dental, flex spending, 401K company match, and profit sharing. Please send resume/work history in confidence to: Rist-Frost-Shumway Engineering, P.C. Attn: W. E. Drake 71 Water Street Laconia, NH 03246 Email: wdrake@rfsengineering.com ]]>

<![CDATA[Rist-Frost-Shumway Engineering (RFS), a 65 person consulting engineering firm located in Laconia, New Hampshire, is seeking Mechanical Engineers to join our talented and team focused staff. Our project types include college/university, health care, laboratory, private secondary schools, public K-12, central plant, commercial, industrial, government, and historic preservation -- all with a focus on sustainable design. Positions require entry-level through 10+ years experience in the design of HVAC systems. B.S.M.E. required. E.I. or P.E., or ability to obtain also required. This is an opportunity to work on large-scale, high-profile building projects throughout the Northeast. RFS offers excellent salary commensurate with experience, liberal benefits package including health, dental, flex spending, 401K company match, and profit sharing. Please send resume/work history in confidence to: Rist-Frost-Shumway Engineering, P.C. Attn: W. E. Drake 71 Water Street Laconia, NH 03246 Email: wdrake@rfsengineering.com ]]>

<![CDATA[Rist-Frost-Shumway Engineering (RFS), a 65 person consulting engineering firm located in Laconia, New Hampshire, is seeking an Energy Engineer to join our talented and team focused staff. Our project types include college/university, health care, laboratory, private secondary schools, public K-12, central plant, commercial, industrial, government, and historic preservation -- all with a focus on sustainable design. Position requires 5+ years experience performing energy modeling and life cycle cost analysis for buildings and building infrastructure, including expertise with computer-based energy simulation software (EQUEST, VisualDOE, EnergyPlus, Ecotect, Trace700, IES Virtual Environment, and/or RESTcreen, among others). Strong written and verbal communication skills required. B.S.M.E. or B.S.E.E. preferred. CEM and LEED AP, or ability to obtain, also required. This is an opportunity to work on large-scale, high-profile building projects throughout the Northeast. RFS offers excellent salary commensurate with experience, liberal benefits package including health, dental, flex spending, 401K company match, and profit sharing. Please send resume/work history in confidence to: Rist-Frost-Shumway Engineering, P.C. Attn: W. E. Drake 71 Water Street Laconia, NH 03246 Email: wdrake@rfsengineering.com ]]>

<![CDATA[Rist-Frost-Shumway Engineering (RFS), a 65 person consulting engineering firm located in Laconia, New Hampshire, is seeking a Mechanical Healthcare Engineer/Project Manager to join our talented and team focused staff. Our project types include college/university, health care, laboratory, private secondary schools, public K-12, central plant, commercial, industrial, government, and historic preservation -- all with a focus on sustainable design. Position requires 10+ years experience in the design of HVAC systems and management of MEP design services for hospital/healthcare projects, with demonstrated client interface skills. B.S.ME. required, P.E. and LEED AP, or ability to obtain, also required. This is an opportunity to work on large-scale, high-profile building projects throughout the Northeast. RFS offers excellent salary commensurate with experience, liberal benefits package including health, dental, flex spending, 401K company match, and profit sharing. Please send resume/work history in confidence to: Rist-Frost-Shumway Engineering, P.C. Attn: W. E. Drake 71 Water Street Laconia, NH 03246 Email: wdrake@rfsengineering.com ]]>

<![CDATA[AEGIS Engineering Services, Inc. has an immediate full time opening for a qualified Mechanical Engineer with a minimum of 10 years experience. The ideal candiate will have a strong work ethic, a solid knowledge of general building construction practices, the ability to perform roof-top inspections, and have excellent writing skills. Please forward your resume and references via email. ]]>

<![CDATA[Nikon Precision Inc. is a leading supplier of semiconductor production and inspection equipment. Our state-of-the-art photolithography equipment is used to image submicron geometries onto various substrates for the manufacture of integrated circuits, LCD panels, and other applications. Our tools help manufacture the heart of most consumer electronics on the market today, including computers, hard drives, non-volatile memory, smartphones, MP3 players, GPS units, and other emerging technical products. As a market leader, Nikon Precision strives to recruit those individuals who have experience meeting the technical challenges of this industry. Our ideal candidates possess strong individual talents, as well as a commitment to the success of the team. Job Summary We have an opening for a Field Service Engineer (FSE) to provide onsite customer service and support. Job responsibilities include equipment installations, upgrades, repairs, and preventative maintenance of complex lithography tools. Our FSEs work with the customer to ensure optimal performance of the Nikon equipment. The successful FSE pro-actively identifies, troubleshoots, and resolves technical issues at the customer site. They are able to successfully work individually or in a group environment, with assistance of advanced technical staff. FSEs also must effectively communicate and instruct customers in the operation and maintenance of the systems. Job Responsibilities •Ensure Nikon equipment is operating at optimal performance levels. •Intepret schematics, mechanical diagrams, block diagrams, part lists and other technical materials. Apply that knowledge to the installation, maintenance, upgrade and repair of Nikon equipment. •Proficient in the use of common electronic diagnostic equipment (i.e. oscilloscope, digital voltmeter, etc). •Assimilate and discern data from diagnostic programs to develop solutions for troubleshooting equipment •Is the primary customer interface / communication link to answer questions and provide updates. Actively responds to customer requests. •Provide clear verbal and written communications to insure appropriate action is executed. •Provide exceptional customer service while working in a clean room environment more than 50% of their time. Qualifications •Bachelor’s degree in EE, ME, EET, MET or ElectroMechanical Engineering or equivalent OR •Associate’s degree in EET or MET plus 4 years related experience in electro-mechanical troubleshooting or equivalent OR •6 years related Military experience in electro-mechanical troubleshooting or equivalent •Self-starter demonstrating technical competence of electrical, mechanical and optical systems or subsystems. •Excellent verbal and written communications skills to work effectively with co-workers, supervisors and customers •Proficient in Microsoft Office suite •Japanese language proficiency a plus Nikon Precision Inc. offers competitive salaries, including the opportunity for overtime such as rotating and/or compressed shift (e.g. alternating 3 days on, 4 days off), on-call pay. Some travel may be required. We also offer excellent benefits, including a superior medical, dental and vision plan, incentive compensation bonus plan, 401(k) employer contribution, paid vacations and more. We are an equal opportunity employer. To apply for this position, please visit <a href="http://www.nikonprecision.com/careers/careers_US.html" rel="nofollow">http://www.nikonprecision.com/careers/careers_US.html</a> ]]>

<![CDATA[We are seeking a talented and highly motivated engineer with a B.S. in Mechanical Engineering (M. Sc. Preferred) and a minimum of 7 years of experience (10 years preferred), in the field of consumer electronics and/or consumer product development. To be successful, candidates must have excellent technical skills, be well versed in Solidworks, experience with design for manufacturability, and demonstrated hands-on problem solving capabilities. Candidates must possess strong interpersonal and organizational skills and be an enthusiastic, positive driving force. RESPONSIBILITIES • Produce functional, accurate detailed part and assembly drawings using Solidworks. • Produce all necessary supporting 2D control documents and Bills of Materials (BOM). • Perform rigorous and in-depth engineering analysis; Ensure design integrity using FEA, etc. • Generate meticulous, detailed, and thorough documentation. • Clearly and concisely express and document ideas, options, problems, issues, test results, etc. • Assist in building and debugging of projects. • Hands-on; assemble, troubleshoot, debug, and qualify subsystems and components. Resolve design issues as appropriate. • Ensure that the specifications, schedule, and the budget have been met. • Establish and maintain effective, clear and open verbal and written communication with team personnel to ensure design, build, and delivery of projects within established timelines and budgets. • Provide support to manufacturing after product release. OTHER REQUIREMENTS: • Must be very detail-oriented • Work well within the team environment. • Have completed a minimum of 3 product life cycles as a key contributor. • Demonstrated capability to perform engineering analysis and familiarity with FEA. • Solid experience in designing sheet metal and injection molded parts. • Strong knowledge of machining and fabrication processes for metals and plastics. • Highly creative professional with analytical and critical thinking. • Must have a strong work ethic and good written and verbal communication skills. SKILLS & EDUCATION • B.S. / M.Sc. Mechanical Engineering with 7-10 years proven experience. • Fluent with and in-depth knowledge of SolidWorks • Working knowledge of Microsoft Office suite. • Project management knowledge and experience. • Professional and personal references are required. • Portfolio required. ]]>

<![CDATA[We are looking for a motivated, up beat person to join our fast paced, dynamic company. We have a full-time employment opportunity for a Production Test Technician. This position typically requires a minimum of an Associates degree, military technical training or equivalent experience and training. In addition, this typically requires 5 years related experience. We are seeking a Production Test Technician to set-up, calibrate, test and troubleshoot circuits, components, instruments, cabling, refrigeration and humidity systems of Environmental Simulation Chambers, including setup of Watlow Controllers and Honeywell Data Recorders. * Candidate will conduct, test and troubleshoot electronic product, components and systems to ensure production quality standards are met. *Determine and may develop test specifications, methods and procedures from blueprints, drawings and diagrams. - Test and troubleshoot assemblies and/or final systems. - Prepare reports summarizing findings and recommend solutions to technical problems. * Determines quality and reliability standards by studying drawings and customer requirements; verifying specifications with engineering and sales staff. * Maintains product quality documentation system by writing or rewriting quality assurance procedures. * Determines disposition of finished product by collecting, classifying, analyzing, and interpreting production and quality data; judging product acceptability in comparison to specifications. *Develops, maintains and improves all test and burn-in processes within area or responsibility. Periodically reviews all process specifications to determine if they accurately reflect the process requirements and test techniques * Documents finished product status by recording and summarizing achieved test results of product, in-process, and finished-product inspection and physical test data; updating quality assurance data base. * Resolves faults by debugging electrical and refrigeration systems; recommending product changes and new components; initiating engineering change orders; providing technical support to customers. * Improves quality results by studying, evaluating, and re-designing processes; implementing changes. Skills/Qualifications: Ability to read wiring schematics, Troubleshoot wiring of electrical components, Reporting & Documenting Results, Promoting Process Improvement, Managing Processes, Manufacturing Methods and Procedures, PC computer literacy. Able to trouble shoot the most difficult of problems with minimum support. Pluses are: knowledge of Watlow controllers, refrigeration, and environmental simulation chambers. Associated Environmental Systems (AES) designs and manufactures standard and customized environmental chambers. Our products vary in size from small bench top chambers to very large walk-in or drive-in environmental rooms. For over 25 years we have enjoyed an outstanding reputation for responsiveness and quality. Our customers come from many different industries including aerospace, pharma, electronic, automotive, semiconductor, and computer. Apple, Segway, and Gerber Scientific are just some examples of our current customers which number in the thousands. Benefits: - Medical Insurance - 401(k) with company match - Dental Plan - Small company atmosphere with the perks/advantages]]>

<![CDATA[ APPLICATIONS ENGINEER - NORTH OF BOSTON Due to growth, we are seeking a capable and knowledgeable Applications Engineer to focus on high-level motion control and systems applications. Only candidates with a BS degree in Electrical, Electro-mechanical, or Mechanical Engineering AND experience with motion control systems will be considered and contacted. Responsibilities include the following: . Engineering support for new motion system application qualifications . Telephone and On-site customer support for newly installed components . Application code development . Technical support for our Sales Engineering group . Product and presentation support of our seminar/workshop series . Design support for System level projects Compensation for this position is a base salary of up to $55,000, car allowance and bonuses. Travel is 25-50% in NE (day trips). ]]>

<![CDATA[Nobis Engineering, Inc. is an engineering and consulting firm seeking a full time Geotechnical Staff Engineer to support geotechnical engineering projects. This entry level position will perform geotechnical engineering analysis, planning and design tasks as part of projects that involve roads and highways, landfills, foundations, structures, airports, bridges, harbors, channels, dams, tunnels, and infrastructure projects. ESSENTIAL DUTIES AND RESPONSIBILITIES • Review and interpret engineering reports, maps, drawings, specifications, regulations, ordinances, field test results, design manuals, aerial photographs, and other data necessary for geotechnical engineering projects. • Prepare basic geotechnical calculations and work with project team members to evaluate the feasibility of engineering planning or design projects based on preparation and analysis of the engineering calculations and other pertinent data. • Assist project team to prepare, review and modify, as necessary, technical reports, specifications, plans, details engineering calculations, and other engineering or project documents. • With assistance from project team members observe and/or inspect project sites prior to, during, or after construction to monitor and/or assess construction progress and ensure conformance with engineering plans, specifications, regulations, and accepted construction and safety standards and prepare written construction inspection and observations summaries. • With assistance from project team members, collect necessary field data through observation or through basic field data collection techniques to include observation of test pits, observation of soil borings and rock cores, and soil classification in the field. • Use engineering software and computer hardware necessary to complete engineering analysis and engineering design projects; specifically CADD software, geotechnical software applications and spreadsheet applications. EDUCATION/EXPERIENCE and QUALIFICATIONS & REQUIREMENTS B.S. in Civil/Geotechnical Engineering with a strong concentration in geotechnical engineering. 1 to 2 years experience specifically field oversight of geotechnical projects and contractor relationships. Engineer in Training (FE) required with ability to obtain professional licensure within approximately three years. Some physical demands during field work activities are typical. Demonstrated ability to read, analyze, and interpret professional journals, technical documents, engineering design drawings and calculations, and regulations. Working knowledge of CADD and geotechnical software as well as standard word and spreadsheet applications is needed. Must possess a valid driver’s license and the ability to travel periodically. Send resume to: Attn: Human Resources, Nobis Engineering, Inc. 18 Chenell Drive, Concord, NH 03301; email: hr@nobisengineering.com, Fax 603/224-2507 (No phone calls, please.) www.nobisengineering.com. EOE ]]>

<![CDATA[Survey firm is seeking a part-time survey techinician to perform office work. MUST have Autodesk Land Desktop or Civil 3D experience. MUST have experience with drafting related to the survey field, including retracing deeds, importing/exporting points and building terrain models. Experience performing research, post-processing GPS data and using GIS data a plus. Please email resume to above email address.]]>

<![CDATA[Nobis Engineering, Inc. is an engineering and consulting firm seeking a full time Geotechnical Project Engineer for our Lowell, MA office. Responsibilities include performing geotechnical engineering, analysis, planning, and/or design tasks for infrastructure projects. Requires a BS in Geotechnical or Civil Engineering. Minimum of 3 years of related experience and/or training, MA PE or ability to acquire within 12 months, excellent written and verbal skills. Send resume to: Attn: Human Resources, Nobis Engineering, Inc. 18 Chenell Drive, Concord, NH 03301 email: hr@nobisengineering.com fax 603/224-2507 (No phone calls, please.) www.nobisengineering.com. EOE ]]>

<![CDATA[Nobis Engineering, Inc. is an engineering and consulting firm seeking a full time Project Manager. The Project Manager – represents the company in communications with clients from initial effort, throughout the entire course of agreement activity, and in post-agreement activities on a regular basis ; communicates with the appropriate Resource Center Manager and Profit Center Manger or other designee relative to project status and performance ; and manages the project team. Participates in initial client meetings, provides support and assists in presentations. Participates in the negotiation process and formulating work plans or proposals. Becomes familiar with the client’s organization, key people, and sensitivities and works with Profit Center Manager to develop strong client relationships. Informs the client of the firm’s services available beyond the scope requirements for future service contracts. Maintains understanding of project financial issues including: project budget, terms of agreement, changes in agreement scope and billing process. Schedules and records all meetings and ensures follow up on decisions. Monitors performance of client responsibilities and communicates deviations to the client. Implements applicable firm policies bearing on client relations. Issues start and stop orders to team members as related to project progress and client directives. Establishes goals for project consistent with contract agreements. Knows fee arrangements, management system, and project schedule requirements. Determines team staffing requirements and works with appropriate Resource Center Manager. Delegates authority and responsibility to degree required for project needs. Ensures project files and reporting are maintained. Monitors progress and takes action when team performance deviates from established plan. Monitors team performance to ensure compliance with contractual arrangements. Monitors product quality, design and technology to ensure consistency with contractual arrangements. Implements the firm’s policies that have an impact on team activities. Makes final decisions in matters of team technical performance relative to procedures and end product as consistent with contract requirements and company procedures and policies. Supervisor Duties: Directs and has the authority to supervise the daily activities of the project team as well as the activities subcontractors involved in the project. May carry out supervisory responsibilities of project staff members in accordance with the organization’s policies and applicable laws. Responsibilities may include interviewing and training employees; planning, assigning and directing work; appraising performance; addressing complaints and resolving problems. A Bachelor’s degree (BA or BS) from four-year college or university; and six to twelve years related experience and/or training; or equivalent combination of education and experience. Licensed in NH as a PE or PG is required; experienced in CERCLA or RCRA hazardous waste site investigation and remediation, QAPP/SAP/HASPs, Phase I and II ESAs, RAPs, remedial implementation, environmental compliance audits, and NH Petroleum Funds; knowledge of hydrogeology a plus. Certification and/or significant previous experience in asbestos, lead paint, PCB and other Hazardous Material (HazMat) Assessment and Abatement a plus. Must possess a valid driver’s license and have access to a vehicle. Must be able to travel periodically.]]>

<![CDATA[About Jones Lang LaSalle Jones Lang LaSalle (NYSE:JLL) is a financial and professional services firm specializing in real estate. The firm offers integrated services delivered by expert teams worldwide to clients seeking increased value by owning, occupying or investing in real estate. With 2009 global revenue of $2.5 billion, Jones Lang LaSalle serves clients in 60 countries from 750 locations worldwide, including 180 corporate offices. The firm is an industry leader in property and corporate facility management services, with a portfolio of approximately 1.6 billion square feet worldwide. LaSalle Investment Management, the company's investment management business, is one of the worlds largest and most diverse in real estate with approximately $40 billion of assets under management. For further information, please visit our Web site, www.joneslanglasalle.com We are currently seeking a Project Manager to join our office located in Boston, MA. PROJECT MANAGER - Boston, MA Responsibilities: <ul> <li> Upon award of a project, develop project specific and client driven goals, schedules, budgets and detailed assumptions </li> <li> Establish and maintain project goals and success criteria the meets the client needs </li> <li> Build rapport with client representatives and ensure scope of project and outside business forces affecting the project is fully understood and that specific deliverables are fully understood with performance standards and other relevant criteria </li> <li> Coordinate any necessary due diligence efforts on behalf of the client, maintaining and delivering all appropriate documentation </li> <li> Develop a detailed project budget based on historical and market data and clearly defined set of budget assumptions </li> <li> Act as the primary senior level contact with the client throughout the duration of the project </li> <li> Guide the client and team through the design implementation process including conceptual, schematic, design development and construction documentation and signoff </li> <li> Develop and maintain the Master Project Schedule </li> <li> Prepare various RFP's needed for vendor and contractor services for the complete project </li> <li> Develop procedures for distribution, receipt, opening, leveling and award </li> <li> Facilitate a project kick-off meeting with internal staff and key stakeholders to ensure responsibilities are communicated and understood by all concerned </li> <li> Actively track each aspect of project performance against schedules and critical path </li> <li> Oversee vendor and project team members work to ensure compliance with contract and client expectations </li> <li> Identify and address areas of concern regarding potential liabilities and risk (fee, our reputation, errors and omissions, etc.) to Management </li> <li> Assist Management in the establishment and refinement of best practices of standards of excellence </li> <li> Assist in training and developing Jones Lang LaSalle team members in the skills and understanding of firm procedures, methodology and practices expected for a successful project implementation </li> <li> Assist Team Lead in informing client of issues affecting relocation and develop process for facilities training and space turnover </li> <li> Demonstrate proficiency in the use and application of all PDS technology as required for assigned projects </li> <li> Ensure accurate management of all accounts receivables to maintain a level not to exceed planned working capital charge as set by corporate finance and the Regional Operations Manager </li> <li> Assist Local PDS Team in meeting AGM numbers on a Regional and National level as determined on a yearly basis by the Management </li> </ul> <img src="http://www.jobtarget.com/c/includes/jvimg.cfm?site=2445&job=7102309">Requirements: <ul> <li> Bachelor Degree in Accounting, Business, Architecture, Engineering, or Construction Management </li> <li> 10+ years of practical experience in a project manager role </li> <li> Ability to regularly communicate analyzed data to client and team to achieve project goals </li> <li> Strong working knowledge of architectural drawings and CAD </li> <li> Flexibility with work hours and travel as needed </li> <li> Highly organized with strong analytical skills </li> <li> Demonstrated ability to support or lead Business Development initiatives as assigned or requested </li> <li> Strong interpersonal skills with an ability to interact with executive level external and internal clients </li> <li> Ability to successfully communicate with architects, contractors, client's representatives, and team members </li> <li> Ability to manage all aspects of projects effectively and efficiently including, but not limited to Budgeting, Scheduling, Submittals, Change orders </li> <li> Knowledge of Microsoft Office applications and Project software </li> </ul> Start a lasting career with Jones Lang LaSalle today! We offer a competitive salary and benefits package. To be considered, please visit our Web site at <a href="http://www.us.am.joneslanglasalle.com/UnitedStates/EN-US/Pages/Careers.aspx" target="new" rel="nofollow">www.us.am.joneslanglasalle.com/UnitedStates/EN-US/Pages/Careers.aspx</a> to apply online. All resumes MUST BE submitted via our web site. Please reference Job: 14283. Jones Lang LaSalle is an Equal Opportunity Employer]]>

<![CDATA[Nobis Engineering, Inc. is an engineering and consulting firm seeking full time Project Engineers for our MA and NH offices. Responsible for performing engineering analysis and calculations as part of environmental projects that involve CERCLA, RCRA, or state environmental regulations. Requires a BS in Environmental, Civil, Geological or Chemical Engineering and seven to ten years experience; PE preferred. Knowledge of and experience with environmental remedial design and construction projects, especially treatment systems, including demonstrated work experience overseeing subcontractors is a plus. Send resume to: Attn: Human Resources Nobis Engineering, Inc. 18 Chenell Drive Concord, NH 03301 email: hr@nobisengineering.com, Fax 603/224-2507 (No phone calls, please.) www.nobisengineering.com. EOE ]]>

<![CDATA[Small established building construction consulting firm seeks Architect or Engineer for the position of Project Manager. Ideal candidates for this position will have a Bachelorâ€™s Degree or higher education with 5 or more years experience in the U.S. Demonstrated performance in planning and monitoring multiple projects concurrently. Hands-on team player with a proven track record of managing workload throughout the entire project lifecycle. Experienced in requirements gathering, creating technical specifications, and producing project plans. Excellent communication skills with the ability to work effectively with clients. Firm consulting work includes all aspects of exterior building systems technologies. We work with architects engaged in restoration or new building design, owners charged with the care of existing properties, and contractors seeking technical assistance. We seek professionals with an interest in building technologies. Professional registration desired. Projects include all building types except single family residential. We offer a relaxed work environment, competitive pay commensurate w/qualifications, excellent benefits and growth potential. No phone calls! Email resume to DBrown@BuildingEnvelopeTech.com or mail to Building Envelope Technologies, Inc., 700 West Center Street, West Bridegewater, MA 02379 or fax to 508-897-0557.]]>

<![CDATA[CrossPoint Engineering is seeking an experienced Field Calibration Technician to support our customers with calibration support. Field Calibration Technician Branch Operations/Westwood MA Customer Locations include MA, RI and NH Job Purpose or Summary: Calibration of various instruments in accordance to conformance principles. Employee will report to Field Supervisor. Essential Duties and Responsibilities: Perform all types of basic to complex instrumentation procedures Routinely test instrument accuracy and make adjustments as necessary Routine service, troubleshooting, installation, and maintenance Determine methods and/or procedures for calibration Systematize and maintain accurate records of equipment calibration, work order history and completion, inventory, and necessary data requirements needed internally or externally by client Reviews materials/documentation to ensure all requirements are being met for GMP’s and internal company SOP’s Responsible for the assistance and training of new staff by showing leadership and guidance Acts as a liaison between field staff and management Preparation of reports, performance measures, fiscal performance for upper management review Responsible for notifying CrossPoint Engineering when equipment needs to be ordered Responsible for notifying CrossPoint Engineering when equipment is missing, broken, and has been altered incorrectly Knowledge & Skill Requirements: Computer literacy – knowledge of MS Office, AutoCAD, CalMAN Has common knowledge of concepts, application, and procedures within field Excellent written and verbal communication skills Strong attention to detail Excellent problem solving and analytical skills Abilities to multi-task in a high demand environment Abilities to work alongside with a team and independently Must have the abilities to learn new software Basic Qualifications: Requires a high school diploma or its equivalent Associates degree in Instrumentation/Calibration required Bachelors degree strongly desired Requires 3-5 years of experience in the field or in a related area Experience working with hand tools, calibration equipment, and electrical test equipment Preferred Qualifications: Certified Control System Technicians (CCST) certification strongly desired or capable of testing within 6 months Candidate should have at least at least 3-5 years experience working in a GMP environment ]]>

<![CDATA[Nobis Engineering, Inc. is an engineering and consulting firm seeking a full time Hydrogeologist or Geochemist for our NH office. Responsible for conducting contaminated sites field investigations and hydrologic characterizations, performing geostatistical analyses including spatial interpolations, estimating the nature and extent of contaminant impacts and developing complex conceptual models of contaminant fate and transport. Requires a BS or MS in Hydrology, Geology or Geochemistry and a minimum of 7 years of experience. PG or equivalent type of certification is required. Applied knowledge of mine site hydrogeology/geochemistry, fractured bedrock hydrogeology and relevant experience conducting CERCLA RI/FS preferred. Send resume to: Attn: Human Resources, Nobis Engineering, Inc. 18 Chenell Drive, Concord, NH 03301 email: hr@nobisengineering.com, Fax 603/224-2507 (No phone calls, please.) www.nobisengineering.com. EOE ]]>